師資介紹 系統與控制組
  1. 師資介紹
  2. Professor
 
  1. 系統與控制組
 
  1. 林俊良Chun-Liang Lin
  2.  
        1. 職稱
        2. 中興講座教授
        1. 學歷
        2. 國立成功大學航太工程博士
        1. 電話
        2. +886-4-22851549 #708
        1. 個人網頁
  3. 重要經歷
  4. 國家太空中心主任(2018/2~2021/1)
    國立中興大學副校長(2017~2018)
    科技部控制學門召集人(2016~2018)
    國立中興大學中興講座教授(2015~)
    國立中興大學副校長(2012~2015)
    國立中興大學產學營運總中心主任(2014~2015)
    國立中興大學校友中心主任(2013~2015)
    國立中興大學講座教授(2011~2015)
    國立中興大學特聘教授(2007~2011)
    國立中興大學電機系主任(2008~2010)
    國立中興大學研發處副研發長(2006~2008)
    國立中興大學頂尖大學計畫執行秘書(2005~2006)
    國立中興大學研發處學術發展組組長(2004~2006)
    國立中興大學教授(2003~2007)
    逢甲大學自控系副教授, 教授(1995~2003)
    中科院助理研究員(1991~1995)
    應機電子公司設計工程師(1983~1985)
    林電機公司電子工程師(1982~1983)
  5.  
  6. 研究領域
  7. 控制系統數學
    生物辨識
    導引/導航與控制
    能源控制
  8.  
  9. 學術服務
  10. -Supervisor-Member of Board of Governors (BoGs): IEEE Taipei Section (2017~2018)
    -Vice President, Chinese Automatic Control Society (2016~)
    -Member of Board of Governors (BoGs): Chinese Automatic Control Society (2006~)
    -Director-Member of Board of Governors (BoGs): IEEE Taipei Section (2015~2016)
    -Chair: IEEE Control Systems Society, Taipei Chapter (2012~2015)
    -Chair: IEEE Control Systems Society, Taipei Chapter (2009~2011)
    -Vice Chair: IEEE Control Systems Society, Taipei Chapter (2003-2005)
    -Technical Committee Member-International Association of Science and Technology for Development (IASTED) (2004~)
    -Organizing Committee Member-IEEE Conference on Industrial Electronics and Applications (ICIEA) (2009, 2010, 2011, 2012)
    -Fuzzy Systems Technical Committee Member: IEEE Computational Intelligence Society (CIS) (2013~).
    -Program Committee Member: 2004 IEEE International Conference on Control Applications (Taipei)
    -Best Paper Award Chair: 2005 International Conference on Automation Technology (Taichung)
    -Best Paper Award Chair: 2007 CACS International Automatic Control Conference (Taiwan)
    -Invited Session Speaker: 2010 IEEE International Conference on Control & Automation (ICCA’10) (Xiamen)
    -General Chair: 2010 IEEE Conference on Industrial Electronics and Applications (ICIEA’10) (Taichung)
    -International Advisory Committee Member: 2011 IEEE Conference on Industrial Electronics and Applications (ICIEA’11) (Beijing)
    -Workshop Chair: 2011 Asian Control Conference (ASCC’11) (Kaohsiung)
    -Program Committee Member: 2011 Asian Control Conference (ASCC’11) (Kaohsiung)
    -Program Committee Member: 2011 IEEE International Symposium on Intelligent Control (ISIC’11) (Denver)
    -Invited Speaker/Organizer: 2010 Workshop on Recent Advances in Control and Robotics, IEEE Control Systems Society, Taipei Chapter (Taichung)
    -Invited Speaker: 2010 Workshop of Dynamics and Control for Biological Systems, Chinese Academy of Sciences (Shanghai)
    -Invited Speaker: 2011 Symposium of Cutting-edge Engineering Education through Introducing Practice-Based Active Learning (Nagoya)
    -Program Committee Member: The 30th Chinese Conference (CCC’11) (Yantai)
    -Program Committee Member: The 31th Chinese Conference (CCC’12) (Hefei)
    -General Chair: 2011 Symposium for Control Program of NSC/SIRCon2011 (Taichung)
    -Program Co-Chair: 2012 National Symposium on System Science and Engineering (NSSSE’12) (Keelung)
    -Technical Program Committee Member: IEEE TENCON 2012
    -Workshop Speaker: IEEE Multi-Conference on Systems and Control (IEEE MSC 2012) (Duvornick)
    -Program Co-Chair: 2013 National Symposium on System Science and Engineering (NSSSE’13) (Taipei)
    -Program Committee Member: The 2nd International Conference on Robot Intelligence Technology and Applications 2013 (RiTA2013) (Denver)
    -Fuzzy Systems Technical Committee Member: 2013 IEEE Computational Intelligence Society (CIS).
    -Fuzzy Systems Technical Committee Member: 2014 IEEE Computational Intelligence Society (CIS).
    -Invited Speaker: 2013 Joint Workshop on Systems and Control (Nanzan University, Nagoya)
    -Invited speaker. 2013 Wiley Author Workshop, Dec. 12, 2013 (Taichung)
    -Program Committee Member: 2014 IEEE International Conference on Fuzzy Systems (Beijing)
    -General Chair: 2014 IEEE Conference on Control & Automation Industrial Electronics and Applications (ICCA’14) (Taichung)
    -Research Project Evaluation Committee Member. Latvian Science Council, Lativia (2012~).
    -Steering Committee Member-International Research-Intensive Center of Excellence (I-RICE), MOST, TAIWAN (2013~2016)
    -Program Committee Member-2014 International Conference on Computer and Communication Technology (ICCCT’14), (Paris, France)
    -Organizer: 2014 Workshop on Advances in Nonlinear Dynamical Systems and Robotics, June 17, 2014, IEEE Control Systems Society, Taipei Chapter (Taichung).
    -Guest Speaker: 2015 Symposium of “Towards a Smart Future-Infinite Evolution”, March 2, 2015 (Garden Hotel, Taipei)
    -Organizing Committee Member, International Conference and Exhibition on Control System, November 03-05, 2015 (Beijing, China).
    -Technical Program Committee Member, IEEE International Conference on Computing, Communication & Automation, May 15-16, 2015 (Greater Noida, India)
    -Program Committee Member, International Conference on Computer and Computational Sciences (ICCCA-2015), 2015 (Uttar Pradesh, India)
    -Program Committee Member - 2015 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE 2015), 2015 (Istanbul, Turkey)
    -Program Committee Member, International Conference on Computer and Computational Sciences (ICCCA-2016), 2016 (Uttar Pradesh, India)
    -Distinguished Invited Lecturer-IEEE International Conference of Industrial Electronics and Applications (ICIEA 2016), 2016 (Heifei)
    -Keynote Speaker-銀髮智慧生活與健康照護研討會, 2016 (Changhua)
    -Best Paper Award Chair: 2016 CACS International Automatic Control Conference (Taiwan)
    -Program Committee Member, International Conference on Computer and Computational Sciences (ICCCA-2017), 2017 (Uttar Pradesh)
    -Keynote Speaker, National Symposium on System Science and Engineering, 2017 (Taipei)
    -General Co-Chair, NSSSE 2017, 2017 (Taipei)
    -Keynote Speaker-科技部大眾科學教育專題講座-分享大師視野, 2017 (國立自然科學博物館)
    -Keynote Speaker, The 12th Intelligent Living Technology Conference, 2017 (Taichung)
    -Technical Committee Member, IEEE Congress on Evolutionary Computation, 2018 (Brazil)
    -General Chair, The 4th International Conference on GPS Radio Occultation, 2018 (Taipei)
    -General Chair, Astronautical Exploration Technology Workshop, 2018 (Hsinchu)
    -Keynote Speaker, 2018 Up3 to Space International Symposium, 2018 (Tainan)
    -Keynote Speaker, 科技部2018秋季「展望」系列演講, 2018 (Taipei)
    -Invited Speaker, 中華民國航空測量及遙感探測學會會員大會, 2018 (Taipei)
    -Invited Speaker, Taipei Conference of International Air and Space Law, 2019 (Taipei)
    -Keynote Speaker, The 10th Asian-Pacific Conference on Aerospace Technology and Science &The 4th Asian Joint Symposium on Aerospace Engineering, 2019 (Hsinchu)
    -Technical Committee Member, International Conference on Advances in Artificial Intelligence (ICAAI), 2019 (|Istanbul, Turkey)
    -General Chair, International Conference on Astronautics and Space Exploration (iCASE), 2019 (Hsinchu)
    -Invited Speaker, PeruSAT-1: Lecciones Aprendidas-2019, Nov. 26, 2019 (Lima, Peru)
    -Invited Speaker, Space Agency of Paraguay, Nov. 2019 (Asuncion, Paraguay)
    -Advisory Committee Member, IEEE International Conference of Industrial Electronics and Applications (ICIEA), 2020 (Kristiansand, Norway)
    -Honorary Chair of Program Committee, The 2020 International Automatic Control Conference, 2020 (Hsinchu)
    -General Chair, The 5th International Conference on GPS Radio Occultation, 2020 (Hsinchu)
    -Invited Speaker, 積彭講座, 核能研究所, Dec. 7, 2020 (Taoyuan)
    -Keynote Speaker, iCASE2020暨2020航太學會學術研討會, Nov. 14, 2020 (Hsinchu)
    -Invited Speaker, The 4th Paraguayan Space Conference, Paraguay Space Agency, Nov. 10, 2020 (Paraguay)
    -Invited Speaker, Programa Internacional de Webinars sobre TECHNOLOGIA ESPACIAL, Nov. 2, 2020 (Peru)
    -Keynote Speaker-第18屆週日閱讀科學, Sep. 20, 2020 (國立科學工藝博物館)
    -Invited Speaker, 中央研究院物理研究所通俗演講, Nov. 10, 2020. (Nangang)
    -Keynote Speaker, 衛星科學工作坊, Nov. 20, 2020. (Chungli)
    -Invited Speaker, 台灣太空黑客松專題演講, Mar. 2021. (國立自然科學博物館)
  11.  
  12. 榮譽獎勵
  13. 目前無榮譽獎勵
  14.  
  15. 著作目錄
    1. A.期刊論文
      1. 1.
      2. C. Zhao, W. L. Hwang, C. L. Lin and W. Chen, “Greedy orthogonal matching pursuit for subspace clustering to improve graph connectivity,” Information Sciences, January 2018.
      1. 2.
      2. C. C. Huang, C. L. Lin, J. J. Kao, J. J. Chang and G. J. Sheu, “Parking guidance for wireless charge using GMR sensors,” IEEE Transactions on Vehicular Technology, January 2018.
      1. 3.
      2. K. H. Chen and C. L. Lin, “Phone to phone wireless charging solution,” Journal of Technology, vol.32, no.1, pp.97-104, January 2017.
      1. 4.
      2. C. L. Lin, M. Y. Yang, E. P. Chen, Y. C. Chen and Y. C. Yu, “Novel antilock braking control system for electric vehicles,” IET Journal of Engineering, January 2017. (SCI)
      1. 5.
      2. Y. Y. Chen, C. L. Lin, Y. C. Lin and C. Zhao, “Non-invasive detection of alcohol concentration based on photoplethysmogram signals,” IET Image Processing, January 2017. (SCI)
      1. 6.
      2. Y. Y. Chen, C. L. Lin, Y. C. Lin and C. Zhao, “Alcoholic intake detection using electrocardiogram and photoplethysmogram,” IEEE Transactions on Biomedical Engineering, January 2017.
      1. 7.
      2. Y. J. Hu, C. L. Lin and W. X. Li, “Design of dynamic genetic memory,” IET Systems Biology, January 2017. (SCI)
      1. 8.
      2. C. L. Lin, Y. J. Hu and W. X. Li, “Circuit design for static genetic memory,” IET Journal of Engineering, January 2017.
      1. 9.
      2. M. Daouda, C. L. Lin, C. S. Lee, C. C. Yang and C. A. Chen, “Model predictive control of sensorless hybrid stepper motors in auxiliary adjuster for stereotactic frame fixation,” Mechatronics, January 2017. (SCI)
      1. 10.
      2. C. Zhao, C. L. Lin, W. Chen, M. K. Chen and J. Zhang, “Fast and robust remote photoplethysmography measurement for heart rate recognition,” IEEE Transactions on Biomedical Engineering, January 2017. (SCI)
      1. 11.
      2. C. L. Lin, T. Y. Kuo, and W. X. Li, “Synthesis of control unit for future biocomputer,” Evolutionary Bioinformatics, January 2017.
      1. 12.
      2. Y. H. Hsu, Y. Y. Chen, C. L. Lin and C. Zhao, “Analysis of heart rate variability via health care platform,” International Journal of Health Care and Medical Sciences, vol.3, no.12, pp.103-116, January 2017. (SCI)
      1. 13.
      2. C. C. Huang, C. L. Lin and Y. K. Wu, “Simultaneous wireless power/Data transfer for electric vehicle charging,” IEEE Transactions on Industrial Electronics, vol.64, no.1, pp.682-690, January 2017. (SCI)
      1. 14.
      2. C. C. Huang and C. L. Lin, “Wireless power and bidirectional data transfer scheme for battery charger,” IEEE Transactions on Power Electronics, January 2017. (SCI)
      1. 15.
      2. P. Suebsaiprom, C. L. Lin and A. Engkaninan, “Undulatory locomotion and effective propulsion for fish-inspired robot,” Control Engineering Practice, vol.58, pp.66-77, January 2017. (SCI)
      1. 16.
      2. C. L. Lin, T. Y. Kuo, N. Charoenkit, “Toward theoretical synthesis of biocomputer,” IET Systems Biology, vol.11, no.1, pp.36-43, January 2017. (SCI)
      1. 17.
      2. C. Zhao, W. L. Hwang, C. L. Lin and W. Chen, “Improved optimization algorithm for proximal point-based dictionary updating methods,” Journal of Electronic Imaging, January 2016. (SCI)
      1. 18.
      2. Y. P. Lin, C. L. Lin, P. Suebsaiprom and S. L. Hsieh, “Estimating evasive acceleration for ballistic targets using an extended state observer,” IEEE Transactions on Aerospace and Electronic Systems, vol.52, no.1, pp.337-349, January 2016. (SCI)
      1. 19.
      2. C. H. Chuang and C. L. Lin, “Optimal design of robust synthetic biological oscillators,” Current Synthetic and Systems Biology, vol.3, no.1, January 2016.
      1. 20.
      2. M. H. Lu, C. C. Huang, C. L. Lin and Y. J. Shen, “Demonstrative DC motor control under power communication network,” International Journal of Sensor Networks and Data Communications, vol.5, no.2, January 2016. (SCI)
      1. 21.
      2. P. K. Chen and C. L. Lin, “Synthesis of genetic clock with combinational biologic circuits,” IEEE/ACM Transactions on Computational Biology and Bioinformatics, vol.12, no.5, pp.1206-1212, January 2015. (SCI)
      1. 22.
      2. Y. J. Tsai, C. S. Lee and C. L. Lin, and C. H. Huang, “Development of flight path planning for multirotor aerial vehicles,” Aerospace, vol.2, pp.171-188, January 2015.
      1. 23.
      2. C. L. Lin, T. Y. Kuo and Y. Y. Chen, “Implementation of a genetic logic circuit: bio-register,” Systems and Synthetic Biology, vol.9, pp.43-48, January 2015. (SCI)
      1. 24.
      2. B.R. Ke, C.L. Lin, H. H. Chien, H.W. Chiu and N. Chen, “A new approach for improving the performance of freight train timetabling of a single-track railway system,” Transportation Planning and Technology, vol.38, no.2, pp.238-264, January 2015. (SCI)
      1. 25.
      2. P. Suebsaiprom and C. L. Lin, “Maneuverability modeling and trajectory tracking for fish robot,” Control Engineering Practice, vol.45, pp.22-36, January 2015. (SCI)
      1. 26.
      2. C. L. Lin, W. T. Chang and M. H. Lu, “MAC throughput improvement using adaptive contention window,” Journal of Computer and Communications, vol.3, pp.1-14, January 2015. (SCI)
      1. 27.
      2. G. J. Sheu, M. J. Sie, M. T. Wu and C. L. Lin, “On the realization of a multifunctional contactless sensor,” International Journal of Artificial Intelligence and Mechatronics, vol.3, no.4, pp.112-117, January 2015.
      1. 28.
      2. P. M. Hsu and C. L. Lin, “Robust stability on averaging behavior of linear time-varying uncertain systems,” Systems Science and Control Engineering, January 2015. (SCI)
      1. 29.
      2. C. K. Chen, C. L. Lin, S. L. Lin and C. T. Chiang, “Data encryption and transmission based on personal ECG signals,” International Journal of Sensor Networks and Data Communications, vol.4, no.2, January 2015. (SCI)
      1. 30.
      2. C. H. Yu, C. L. Lin and P. M. Hsu, “A new algorithm to achieve bandwidth fairness: Power-RED,” Journal of Engineering, NCHU, vol.25, no.1, pp.1-7, January 2014.
      1. 31.
      2. C. H. Chuang, C. L. Lin and Y. C. Lin, “Robust optimal control of time-delay systems based on Razumikhin theorem,” Asian Journal of Control, vol.16, no.1, pp.1-8, January 2014. (SCI)
      1. 32.
      2. W. C. Lin, C. L. Lin, P. M. Hsu, and M. T. Wu, “Realization of anti-lock braking strategy for electric scooters,” IEEE Transactions on Industrial Electronics, vol.61, no.6, pp.2826-2833, January 2014. (SCI)
      1. 33.
      2. C. H. Chuang and C. L. Lin, “Synthesizing genetic sequential logic circuit with clock pulse generator,” BMC Systems Biology, vol.8, no.63, January 2014. (SCI)
      1. 34.
      2. M. Y. Yang, M. T. Wu, C. L. Lin, and C. S. Lee, “Design of an Anti-lock Braking System for Electric Vehicles,” IEEE Transactions on Control Systems Technology, January 2014.
      1. 35.
      2. P. M. Hsu, C. L. Lin and M. Y. Yang, “On the complete coverage path planning for mobile robots,” Journal of Intelligent and Robotic Systems, January 2013. (SCI)
      1. 36.
      2. C. K. Chen, C. L. Lin, C. T. Chiang and S. L. Lin, “Information Encryption Using ECG Signals with Chaotic Functions and Transmissions via Synchronized Circuits,” IET Information Security, January 2013.
      1. 37.
      2. B. R. Ke, C. L. Lin, C. P. Wang and F. Cao, “Optimization of fuel efficiency for freeway vehicles,” IET Intelligent Transport Systems, January 2013. (SCI)
      1. 38.
      2. Y. P. Lin, C. L. Lin and Y. H. Li, “Development of 3-D modified proportional navigation guidance law against high-speed targets,” IEEE Transactions on Aerospace and Electronic Systems, vol.49, no.1, pp.677-687, January 2013. (SCI)
      1. 39.
      2. C. K. Chen, C. L. Lin, S. L. Lin, Y. M. Chiu and C. T. Chiang, “A chaotic Theoretical approach to ECG-based identity recognition,” IEEE Computational Intelligence Magazine, January 2013.
      1. 40.
      2. C. H. Juang and C. L. Lin, “Robust estimation of stochastic gene-network systems,” Journal of Biomedical Science and Engineering, vol.60, pp.213-222, January 2013.
      1. 41.
      2. T. Jennawasin, M. Kawanishi, T. Narikiyo and C. L. Lin, “Robust D-stability analysis via positive polynomials and LMIs,” International Journal of Computational Intelligence in Control, vol.5, no.2, pp. 75-82, January 2013.
      1. 42.
      2. Y. K. Wu, C. C. Huang and C. L. Lin, “Resolution of the unit commitment problems by using the hybrid Taguchi-Ant colony system algorithm,” Electrical Power and Energy Systems, vol.49, pp.188-198, January 2013. (SCI)
      1. 43.
      2. Y. C. Chang, C. L. Lin and T. Jennawasin, “Design of synthetic genetic oscillators based on RSGA,” Evolutionary Bioinformatics, vol.9, pp.137-150, January 2013.
      1. 44.
      2. C. H. Chuang, C. L. Lin, Y. C. Chang, T. Jennawasin and P. K. Chen, “Design of synthetic biological logic circuits based on evolutionary algorithm,” IET Systems Biology, vol.7, no.4, January 2013. (SCI)
      1. 45.
      2. M. T. Wu, C. L. Lin, C. C. Lin and L. P. Chung, “Stabilizing current driver for high-voltage light-emitting diodes,” IET Power Electronics, January 2013. (SCI)
      1. 46.
      2. C. L. Lin and P. K. Chen, “Synthesizing periodic triggering signals with genetic oscillators,” IET Systems Biology, January 2013. (SCI)
      1. 47.
      2. S. L. Hsieh, C. L. Lin and Y. P. Lin, “Trajectory estimation based on extended state observer with filter,” Aeronautical Journal, January 2013. (SCI)
      1. 48.
      2. C. W. Huang, C. L. Lin and Y. P. Lin, “Estimator design for re-entry targets,” ISA Transactions, January 2013. (SCI)
      1. 49.
      2. C. H. Chuang and C. L. Lin, “A novel synthesizing genetic logic circuit: frequency multiplier,” IEEE/ACM Transactions on Computational Biology and Bioinformatics, January 2013.
      1. 50.
      2. S. L. Lin, C. K. Chen, C. L. Lin, W. C. Yang and C. T. Chiang, “Individual identification based on chaotic electrocardiogram signals during muscular exercise,” IET Biometrics, January 2013. (SCI)
      1. 51.
      2. P. M. Hsu and C. L. Lin, “Queue oscillation suppression in large-scale networks by extended network disturbance,” IET Control Theory and Applications, January 2013.
      1. 52.
      2. B. R. Ke, C. L. Lin and C. C. Yang, “Optimization of train energy-efficient operation for mass rapid transit systems,” IET Intelligent Transport Systems, vol.6, no.1, pp.58-66, January 2012. (SCI)
      1. 53.
      2. C. L. Lin, T.C. Kao, C. S. Lee and C. H. Huang, “Evolutionary flight route planner for UAVs using potential field approach,” AIAA Journal of Aerospace Computing, Information, and Communication, vol.9, no.3, pp.92-109, January 2012. (SCI)
      1. 54.
      2. C. K. Chen, C. L. Lin, C. T. Chiang and S. L. Lin, “Personalized information encryption using ECG signals with chaotic functions,” Information Sciences,, vol.193, pp.125-140, January 2012. (SCI)
      1. 55.
      2. V. T. Liu, C. L. Lin and H. Y. Wing, “New realization of Preisach model using adaptive polynomial approximation,” International Journal of Systems Science, vol.43, no.9, pp.642-1649, January 2012. (SCI)
      1. 56.
      2. C. F. Hsu, C. L. Lin, W. C. Kao, Y. J. Tsai and H. M. Chen, “A biking route planning method for cyclists,” Journal of Technology, vol.27, no.33, pp.153-160, January 2012.
      1. 57.
      2. C. C. Yang and C. L. Lin, “Robust adaptive sliding mode control for synchronization of space-clamped FitzHugh-Nagumo neurons,” Nonlinear Dynamics, vol.69, pp.2089-2096, January 2012.
      1. 58.
      2. J. Y. Wu, S. P. Hsu, C. L. Lin and Y. J. Peng, “Balancing charge/discharge management for series/parallel battery packs,” Journal of Engineering, National Chung Hsing University, vol.23, no.1, pp.13-26, January 2012.
      1. 59.
      2. P. Suebsaiprom, C. L. Lin and S. Saimerk, “Fish robot modeling and simulation: Fish–tail and rigid-body motion,” International Journal of Advancements in Computing Technology, vol.4, no.18, pp.105-114, January 2012.
      1. 60.
      2. C. H. Yu and C. L. Lin, “Power-RED: a novel algorithm to achieve bandwidth fairness,” IET Networks, January 2011.
      1. 61.
      2. C. H. Huang and C. L. Lin, “Evolutionary neural networks and DNA computing algorithms for dual-axis motion control,” Engineering Applications of Artificial Intelligence, vol.24, pp.1263-1273, January 2011. (SCI)
      1. 62.
      2. P. M. Hsu and C. L. Lin, “Congestion control mechanism concerning queue oscillation avoidance: a backstepping control approach,” Automatica,, January 2011.
      1. 63.
      2. C. L. Lin, C. H. Huang, C. S. Lee and M. J. Chao, “Identification of flight vehicle models using fuzzified eigensystem realization algorithm,” IEEE Transactions on Industrial Electronics, vol.58, no.11, pp.5206-5219, January 2011. (SCI)
      1. 64.
      2. C. S. Lee, C. L. Lin, V. T. Liu, C. C. Chen, W. S. Chen and H. J. Lin, “Implementation of multi-mini UAV navigation control system,” Journal of Aeronautics, Astronautics and Aviation, vol.43, no.2, pp.129-136, January 2011. (EI)
      1. 65.
      2. 林俊良、黃啟東, “電動機車電能回充控制器,” 中華民國發明專利 (專利號碼: I352671), January 2011.
      1. 66.
      2. C. L. Lin, “Congestion control for large-scale network with active queue management,” Engineering Science and Technology Bulletin, vol.114/115, pp.41, January 2011.
      1. 67.
      2. B. R. Ke, C. L. Lin and C. W. Lai, “Optimisation of train-speed trajectory and control for mass rapid transit systems,” Control Engineering Practice, vol.19, no.7, pp.675-687, January 2011. (SCI)
      1. 68.
      2. P. M. Shiu, C. L. Lin and C. H. Yu, “Active queue management within large-scale wired networks,” International Journal of Communications, Network and System Sciences, vol.4, pp.241-248, January 2011. (EI)
      1. 69.
      2. C. W. Tsai, C. L. Lin and C. H. Huang, “Microbrushless DC motor control design based on real coded structural genetic algorithm,” IEEE/ASME Transactions on Mechatronics, vol.16, no.1, January 2011. (SCI)
      1. 70.
      2. C. H. Huang, C. L. Lin and M. J. Chao, “FERA in parameter identification with application in low speed wind tunnel test,” Aerospace Science and Technology, vol.15, pp.495-509, January 2011. (SCI)
      1. 71.
      2. C. T. Huang, C. L. Lin and W. C. Lin, “Efficient energy managing control for electrical scooters,” IET Electrical Systems in Transportation, vol.2, no.1, pp.9-17, January 2010. (SCI)
      1. 72.
      2. C. H. Chuang and C. L. Lin, “On robust state estimation of gene networks,” Biomedical Engineering and Computational Biology, vol.2, pp.22-36, January 2010.
      1. 73.
      2. C. L. Lin, S. L. Hsiao and C. K. Chen, “Balance of emulated MDOF human postural systems,” International Journal of Engineering Science, vol.48, pp.751-770, January 2010. (SCI)
      1. 74.
      2. C. L. Lin, “Analysis and design of advanced controllers for biological systems,” Engineering Science and Technology Bulletin, vol.107, January 2010.
      1. 75.
      2. C. L. Lin and C. H. Chuang, “Review of control theory and dynamics in systems biology,” International Journal of Systems and Synthetic Biology, vol.1, no.1, pp.39-61, January 2010.
      1. 76.
      2. V. T. Liu, C. H. Liu, H. W. Li, C. L. Chen, C. L. Lin and Y. C. Lin, “Measurement and tracking control of the Z-tilt error compensating stage of the nano-measuring machine,” The International Journal of Systems & Cybernetics, vol.39, no.6, pp.1029-1039, January 2010. (SCI)
      1. 77.
      2. Y. P. Lin, L. P. Tsao and C. L. Lin, “Development of three-dimensional aiming point guidance law,” International Journal of Systems Science, vol.41, no.11, pp.1353-1362, January 2010. (SCI)
      1. 78.
      2. C. L. Lin, Y. P. Lin and K. M. Chen, “On the design of fuzzified trajectory shaping guidance law,” ISA Transactions, vol.48, no.2, January 2009. (SCI)
      1. 79.
      2. C. H. Huang, H. Y. Jan, C. L. Lin and C. S. Lee, “System identification: DNA computing approach,” ISA Transactions, vol.48, pp.254-263, January 2009. (SCI)
      1. 80.
      2. B. R. Ke, M. C. Chen and C. L. Lin, “Block-layout design using MAX-MIN ant system for saving energy on mass rapid transit systems,” IEEE Transactions on Intelligent Transportation Systems, vol.10, no.2, pp.226-235, January 2009. (SCI)
      1. 81.
      2. H. Y. Jan, C.L. Lin and T. S. Hwang, “Design of reduced-order controller by using DNA computing approach,” Applied Intelligence, January 2009.
      1. 82.
      2. C. W. Tsai, C. H. Huang and C. L. Lin, “Structure-specified IIR filter and control design using real structured genetic algorithm,” Applied Soft Computing, vol.9, pp.1285-1295, January 2009. (SCI)
      1. 83.
      2. Y. C. Lin and C. L. Lin, “Optimal control approach for robust control design of neutral systems,” Optimal Control, Applications and Methods,, vol.30, pp.319-343, January 2009. (SCI)
      1. 84.
      2. C. K. Lee, C. L. Lin and B. M. Chen, “Autonomous vehicle parking using hybrid artificial intelligent approach,” Journal of Intelligent and Robotic Systems, vol.56, pp.319-343, January 2009. (SCI)
      1. 85.
      2. C. L. Lin, Y. W. Liu and C. H. Chuang, “Control design for signal transduction networks,” Bioinformatics and Biology Insights, vol.3, pp.1-14, January 2009.
      1. 86.
      2. M. W. Hong, C. L. Lin, B. M. Shiu and N. Aouf, “Stabilizing networked pneumatic control systems with time-delays,,” International Journal of Computational Intelligence and Applications, vol.8, no.2, pp.209-223, January 2009. (EI)
      1. 87.
      2. P. A. Juang and C. L. Lin, “The electro-mechanical transfer function of an ultrasonic wheel system,” Measurement, vol.42, pp.1417-1425, January 2009. (SCI)
      1. 88.
      2. M. W. Hong and C. L. Lin and B. M. Shiu, “Stabilizing network control for pneumatic systems with time-delays,” Mechatronics, vol.19, pp.399-409, January 2009.
      1. 89.
      2. N. Aouf, M. Kharbat and C. L. Lin, “Video detection, tracking and path planning for ground autonomous systems,” International Journal of Computational Intelligence in Control, vol.1, no.2, pp.85-94, January 2009.
      1. 90.
      2. C. L. Lin, Y.P. Lin and T. L. Wang, “A fuzzy guidance law for vertical launch interceptors,” Control and Engineering Practice, vol.17, pp.914-923, January 2009. (SCI)
      1. 91.
      2. C. L. Lin, H. J. Jan, J. R. Lin and T. S. Hwang, “Singularity characterization and path planning of a new 3 links 6-DOFs parallel manipulator,” European Journal of Control, vol.14, no.3, January 2008.
      1. 92.
      2. H.Y. Jan, C. L. Lin, C. H. Huang and T. S. Hwang, “Robust motion control design for dual-axis motion platform using evolutionary algorithm,” Sadhana-Academy Proceedings in Engineering Sciences, vol.33, no.6, pp.803-820, January 2008. (SCI)
      1. 93.
      2. C. L. Lin, C. H. Chen, and H. C. Huang, “Stabilizing control of networks with uncertain time-varying communication delays,” Control Engineering Practice, vol.16, pp.56-66, January 2008. (SCI)
      1. 94.
      2. C. L. Lin, Y. W. Liu and C. H. Chuang, “Analysis of signal transduction networks in Michaelis-Menten equations and S-systems,” International Journal of Biology and Biomedical Engineering, vol.2, no.2, January 2008.
      1. 95.
      2. C. H. Huang, C. L. Lin and H. Y. Jan, “Identification and control using DNA computing algorithms,” International Journal of Biology and Biomedical Engineering, vol.2, no.3, pp.108-117, January 2008.
      1. 96.
      2. C. S. Chen, C. L. Lin and C. N. Chen, “Design of robust and economy speed controllers for electric scooters,” Journal of Vehicular Engineering, vol.5, no.5, pp.143-164, January 2008.
      1. 97.
      2. C. L. Li, C. L. Lin and C. K. Chen, “Stabilizing postural control for emulated human balancing systems,” International Journal of Engineering Science, vol.46, no.11, pp.1120-1135, January 2008.
      1. 98.
      2. H. C. Huang, C. L. Lin and M. W. Hong, “Design and realization of stabilizing network control systems with uncertain time-varying communication delays,” Journal of Engineering, National Chung Hsing University, vol.18, no.3, pp.151-166, January 2007.
      1. 99.
      2. C. S. Chen and C.L. Lin, “An efficient energy managing controller for electric scooters,” International Journal of Electrical Engineering, January 2007.
      1. 100.
      2. C.L. Lin and T.L. Wang, “Fuzzy side force control for missile against hypersonic target,” IET Control Theory and Applications, vol.1, no.1, pp.33-43, January 2007. (SCI)
      1. 101.
      2. C.L. Lin, W.C. Chang, and C.H. Chen, “A new dither-based friction compensation scheme,” Automatica, January 2007.
      1. 102.
      2. Y. C. Lin, C. L. Lin, and C. C. Yang, “Robust active vibration control for rail vehicle pantograph,” IEEE Transactions on Vehicular Technology, vol.56, no.4, pp.1994-2004, January 2007. (SCI)
      1. 103.
      2. C. L. Lin, J. R. Lin and H. Y. Jan, “Singularity analysis and path planning for a MDOF manipulator,” Journal of the Chinese Institute of Engineers, vol.30, no.5, pp.917-922, January 2007. (SCI)
      1. 104.
      2. V. T. Liu, H. C. Huang, C. L. Lin and Z. J. Jian, “Neural net-based modeling and control of a micro-positioning platform using piezoelectric actuators,” Journal of Vibration and Control, vol.13, no.3, pp.309-325, January 2007. (SCI)
      1. 105.
      2. C.H. Chen, C.L. Lin and T. S. Hwang, “Stability of networked control systems with time-varying delays,” IEEE Communications Letters, vol.11, no.3, pp.270-272, January 2007. (SCI)
      1. 106.
      2. C. L. Lin and C. T. Liu, “Failure detection and adaptive compensation for fault tolerable flight control systems,” IEEE Transactions on Industrial Informatics, vol.3, no.4, January 2007.
      1. 107.
      2. C. L. Lin and C. T. Liu, “Failure detection and adaptive compensation for fault tolerable flight control systems,” IEEE Transactions on Industrial Informatics, vol.3, no.4, pp.322-331, January 2007. (SCI)
      1. 108.
      2. C. L. Lin, H. Y. Jan, and T. S. Hwang, “Structure optimization of PID controllers based on DNA coding method,” Optimal Control, Applications and Methods, January 2006.
      1. 109.
      2. Y. C. Lin, C. L. Lin and N. C. Shieh, “An evolutionary approach to active suspension design of rail vehicles,” Journal of the Chinese Institute of Engineers, vol.29, no.5, January 2006. (SCI)
      1. 110.
      2. Y.C. Lin, C.L. Lin and N.C. Shieh, “A hybrid evolutionary approach for robust active suspension design of light rail vehicles,” IEEE Transactions on Control Systems Technology, vol.14, no.4, January 2006.
      1. 111.
      2. C.L. Lin and C. H. Chen, “Robust control of interconnected network schemes subject to random time-varying communication delays,” AEU International Journal of Electronics and Communications, vol.60, pp.647-658, January 2006. (SCI)
      1. 112.
      2. H. Y. Jan, C. L. Lin and T. S. Hwang, “Self-organized PID control design using DNA computing approach,” Journal of the Chinese Institute of Engineers, vol.29, no.2, pp.251-261, January 2006. (SCI)
      1. 113.
      2. C. L. Lin, K. M. Chen, M. T. Wu and S. W. Hwang, “Hybrid guidance law for interception of ballistic target,” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol.220, pp.525-536, January 2006. (SCI)
      1. 114.
      2. H.Y. Jan, C. L. Lin, C. H. Hwang, “Decoupling control design for dual axes platforms,” Journal of the Chinese Society of Mechanical Engineers, vol.26, no.6, pp.741-745, January 2005.
      1. 115.
      2. C. L. Lin, H. Y. Jan, and T. S. Hwang, “Optimal path planning on 3D space using a DNA computing algorithm,” IEEE Transactions on Systems, Man, and Cybernetics, Pt. B, January 2005.
      1. 116.
      2. C.L. Lin and H. Y. Jan, “Mixed / multiobjective PID control for a linear brushless DC Motor: An evolutionary approach,” Control and Intelligent Systems, vol.33, no.2, January 2005. (SCI)
      1. 117.
      2. C.L. Lin, H.Z. Hung and T.L. Wang, “Fuzzy side force control for missile against hypersonic target,” IEE Proceedings-Control Theory and Applications, submitted, January 2004.
      1. 118.
      2. C.L. Lin and K.M. Chen, “Hybrid guidance law for interception of ballistic target,” AIAA Journal of Guidance, Control, and Dynamics, submitted, January 2004.
      1. 119.
      2. C. L. Lin, H. Y. Jan and T. S. Hwang, “Self-Organized PID control design with application to linear transportation system,” EEE/ASME Trans. Mechatronics, submitted, January 2004.
      1. 120.
      2. C. L. Lin, W. C. Shi, C. L. Hwang and H. C. Chang, “Design and analysis of a dithered radome error compensation scheme,” IEEE Trans. Control Systems Technology, submitted, January 2004.
      1. 121.
      2. C. L. Lin, H. Y. Jan, and T. S. Hwang, “Optimal path planning on 3D space using a DNA computing algorithm,” IEEE Trans. Systems, Man, and Cybernetics, Pt. B, submitted, January 2004.
      1. 122.
      2. C. L. Lin, H. Y. Jan, and T. S. Hwang, “Novel self-organizing PID control design based on DNA coding method,” IEEE Trans. Evolutionary Computation, submitted, January 2004.
      1. 123.
      2. C. L. Lin, T. S. Hwang, and C. T. Liu, “Failure detection and adaptive compensation for fault tolerable flight control systems,” IEEE Trans. Industrial Applications, submitted, January 2004.
      1. 124.
      2. C. L. Lin, C. H. Chen and V. T. Liu, “A new time-delay compensating scheme for electro-hydraulic systems,” International Journal of Fluid Power, accepted, January 2004.
      1. 125.
      2. C. L. Lin, T. R. Lin and R. C. Tsai, “Singularity characterization and optimal path planning for a mixed linear and rotary motors-based dynamic platform,” JSME International Journal, Series C, submitted, January 2004.
      1. 126.
      2. C.L. Lin and C.L. Huang, “Design of a new fuzzy terminal guidance law,” International Journal of Systems Science, submitted, January 2004.
      1. 127.
      2. N.C. Hsieh, C.L. Lin and Y.C. Lin, “Optimal design for passive suspension of a light rail vehicle using constrained multiobjective evolutionary,” Journal of Sound and Vibration, accepted., January 2004. (SCI)
      1. 128.
      2. C.L. Lin, T.H. Hwang and R.C. Tsai, “Modeling and simulation of a linear motors-based platform manipulator,” International Journal of Modeling and Simulation, submitted, January 2004.
      1. 129.
      2. C.L. Lin, H.Z. Hung, Y.Y. Chen and B.S. Chen, “Development of an integrated fuzzy-logic-based missile guidance law against high speed target,” IEEE Transactions on Fuzzy Systems, vol.12, no.2, pp.157-169, January 2004. (SCI)
      1. 130.
      2. C.L. Lin and C.H. Chen, “A neural net-based time-delay compensation scheme and disturbance rejection for pneumatic systems,” IEEE Transactions on Neural Networks, January 2004.
      1. 131.
      2. V.T. Liu, C.L. Lin and G.P. Lee, “Neural net-based identification and control of a thin plate using piezoelectric actuators and sensors,” International Journal of Systems Science, vol.6, no.15, pp.355-373, January 2004. (SCI)
      1. 132.
      2. C.L. Lin, T.H. Hwang and R.C. Tsai, “Adaptive control for a mixed linear and rotary motors-based dynamic platform,” IEEE Transactions on Control Systems Technology, January 2003. (SCI)
      1. 133.
      2. C.L. Lin, “On the design of a 6DOF mixed linear and rotatory motor-based dynamic platform,” Engineering Science and Technology Bulletin, vol.68, pp.97-100, January 2003.
      1. 134.
      2. C.L. Lin and C.L Huang, “A dynamically fuzzy gain-scheduled design for missile autopilot,” The Aeronautical Journal, vol.107, no.1076, pp.599-606, January 2003. (SCI)
      1. 135.
      2. C.L. Lin, V. T. Liu and G.P. Lee, “Identification and control of a benchmark flexible structure using piezoelectric actuators and sensors,” Journal of Vibration and Control, vol.9, no.12, pp.1401-1420, January 2003. (SCI)
      1. 136.
      2. C.L. Lin, H. Y. Jan and N.C. Hsieh, “GA-based multiobjective PID control for a linear brushless DC motor,” IEEE/ASME Transactions on Mechatronics, vol.8, no.1, pp.56-65, January 2003. (SCI)
      1. 137.
      2. T.H. Hwang, C.L. Lin and R.C. Tsai, “Analysis and design for a linear motors based parallel manipulator,” International Journal of Robotics and Automation, vol.18, no.3, pp.97-110, January 2003.
      1. 138.
      2. C.L. Lin and S.W. Huang, “Control for uncertain plants using confined adaptive fuzzy inference systems,” International Journal of Fuzzy Systems, vol.5, no.4, pp.212-220, January 2003. (SCI)
      1. 139.
      2. C.L. Lin and H.Y. Jan, “New stability conditions for discrete singularly perturbed systems,” Transactions of the Chinese Institute of Electrical Engineering, vol.10, no.3, pp.259-268, January 2003. (EI)
      1. 140.
      2. N.C. Hsieh, C.T. Chang, C.L. Lin and H.Y. Jan, “Robust position control of a transportation carriage directly driven by linear motor using wavelet neural network,” Engineering Applications of Artificial Intelligence, vol.15, pp.479-489, January 2002. (SCI)
      1. 141.
      2. C.L. Lin and H.Y. Jan, “Multiobjective PID control for a linear brushless DC motor: an evolutionary approach,” IEE Proceedings-Electric Power Applications, vol.149, no.6, pp.397-406, January 2002. (SCI)
      1. 142.
      2. M.T. Wu, F.L. Hu and C.L. Lin, “Anti-lock braking system for unmanned aerial vehicle,” Transactions of the Aeronautical and Astronautical Society of the Republic of China, vol.34, no.2, pp.167-177, January 2002. (EI)
      1. 143.
      2. C.L. Lin and H.Z. Haung, “An novel anti-lock brake system using fuzzy inference system: analysis and design,” Journal of Technology, vol.17, no.1, pp.21-30, January 2002.
      1. 144.
      2. N.C. Shieh, P.C. Tung and C.L. Lin, “Robust output tracking control of a linear brushless DC motor with time-varying disturbances,” IEE Proceedings-Electric Power Applications, vol.149, no.1, pp.39-45, January 2002. (SCI)
      1. 145.
      2. C.L. Lin and T.Y. Lin, “Approach to adaptive neural net-based control design,” IEE Proceedings-Control Theory and Applications, vol.149, no.4, pp.331-342, January 2002. (SCI)
      1. 146.
      2. C.L. Lin and T.Y. Lin, “Neural net-based control for a class of nonlinear systems,” Neural Processing Letters, vol.15, no.2, pp.157-177, January 2002. (SCI)
      1. 147.
      2. C.L. Lin and R.M. Lai, “A novel approach to guidance and control system design using genetic-based fuzzy logic model,” IEEE Transactions on Control Systems Technology, vol.10, no.4, pp.600-610, January 2002. (SCI)
      1. 148.
      2. C.L. Lin, “Precision servo control for a linear brushless motor,” Engineering Science and Technology Bulletin, vol.60, pp.23-27, January 2002.
      1. 149.
      2. C.L. Lin, N.C. Shieh and P.C. Tung, “position control of linear brushless DC motor using wavelet controller,” IEEE Transactions on Aerospace and Electronic Systems, vol.38, no.3, pp.918-932, January 2002. (SCI)
      1. 150.
      2. C.L. Lin and H.T. Huang, “Linear servo motor control using adaptive neural networks,” IME Journal of Systems and Control Engineering, vol.216, pp.407-427, January 2002. (SCI)
      1. 151.
      2. B.S. Chen, Y.Y. Chen and C.L. Lin, “Nonlinear fuzzy H guidance law with saturation of actuators against maneuvering targets,” IEEE Transactions on Control Systems Technology, vol.10, no.6, pp.769-779, January 2002. (SCI)
      1. 152.
      2. B.S. Chen, Y.Y. Chen and C.L. Lin, “Nonlinear robust guidance law against maneuvering targets: fuzzy observer-based feedback approach,” IEEE Transactions on Aerospace and Electronic Systems, January 2001.
      1. 153.
      2. C.L. Lin and T.Y. Lin, “An design approach for neural net-based control schemes,” IEEE Transactions on Automatic Control, vol.46, no.10, pp.1599-1605, January 2001. (SCI)
      1. 154.
      2. C.L. Lin and P.S. Hao, “Robust fuzzy control of a vibrating thin plate,” JSME International Journal, Series C, vol.44, no.2, pp.315-326, January 2001. (SCI)
      1. 155.
      2. C.L. Lin and R.M. Lai, “Parameter design for guidance and control system using genetic approach,” Aerospace Science and Technology, vol.5, no.6, pp.425-434, January 2001. (SCI)
      1. 156.
      2. C.L. Lin and C.L. Chen, “Realisation of a Riccati equation-based controller using gradient-type neural networks,” Control Engineering Practice, vol.6, pp.329-341, January 2001. (SCI)
      1. 157.
      2. C.L. Lin, “Neural networks for matrix scaling problem solving,” Asian Journal of Control, vol.3, no.4, pp.289-299, January 2001. (EI)
      1. 158.
      2. C.L. Lin and H.W. Su, “Adaptive fuzzy gain scheduling in guidance system design,” AIAA Journal of Guidance, Control, and Dynamics, vol.24, no.4, pp.683-692, January 2001. (SCI)
      1. 159.
      2. C.L. Lin and Y.H. Hsiao, “Adaptive feedforward control for disturbance torque rejection in seeker stabilizing loop,” IEEE Transactions on Control Systems Technology, vol.9, no.1, pp.108-121, January 2001. (SCI)
      1. 160.
      2. C.L. Lin, “Stability analysis of radome error and calibration using neural networks,” IEEE Transactions on Aerospace and Electronic Systems, vol.37, no.4, pp.1442-1450, January 2001. (SCI)
      1. 161.
      2. C.L. Lin, V.T. Liu and P.S. Hao, “Robust neuro control for rotating disk vibrations,” IME Journal of Mechanical Science Engineering, vol.214, pp.1529-1544, January 2000. (SCI)
      1. 162.
      2. C.L. Lin, C. C. Lai and T.H. Huang, “A neural network for linear matrix inequality problems,” IEEE Transactions on Neural Networks, vol.11, no.5, pp.1078-1092, January 2000. (SCI)
      1. 163.
      2. C.L. Lin and T.H. Huang, “ novel approach solving for linear matrix inequalities using neural networks,” Neural Processing Letters, vol.11, no.2, pp.153-169, January 2000. (SCI)
      1. 164.
      2. C.L. Lin and H.W. Su, “control theory in guidance and control system design: an overview,” Proceedings of the National Science Council, R.O.C., Part A, vol.24, no.1, pp.15-30, January 2000. (EI)
      1. 165.
      2. C.L. Lin and Y.Y. Chen, “Design of fuzzy logic guidance law against high-speed target,” AIAA Journal of Guidance, Control, and Dynamics, vol.23, no.1, pp.17-25, January 2000. (SCI)
      1. 166.
      2. V.T. Liu, C.L. Lin, L.C. Shiue and H.W. Su, “Design of fuzzy-PD based guidance law,” Journal of Technology, vol.15, no.1, pp.113-121, January 2000.
      1. 167.
      2. C.L. Lin, “Neural net-based adaptive LQ control,” Optimal Control and Applications, January 2000.
      1. 168.
      2. C.L. Lin and W.R. Hsiao, “net-based compensator design for radome refraction slope error,” Journal of Feng Chia University, vol.35, pp.93-112, January 1999.
      1. 169.
      2. C.L. Lin, “On the study of optimal guidance design against high speed attacking target,” Engineering Science and Technology Bulletin, vol.35, pp.15-18, January 1999.
      1. 170.
      2. C.L. Lin, V.T. Liu and H.W. Su, “A novel design approach for fuzzy guidance law,” Transactions of the Aeronautical and Astronautical Society of the Republic of China, vol.31, no.2, pp.107-115, January 1999. (EI)
      1. 171.
      2. C.L. Lin and T.H. Huang, “Realization of electronic neural network for solving Lyapunov matrix equation,” Transactions of the Chinese Institute of Electrical Engineering, vol.6, no.4, pp.331-338, January 1999. (EI)
      1. 172.
      2. C.L. Lin and Y.Y. Chen, “of an advanced guidance law against high speed attacking targe,” Proceedings of the National Science Council, R.O.C., Part A, vol.23, no.1, pp.60-74, January 1999. (EI)
      1. 173.
      2. C.Y. Chung and C.L. Lin, “A transformed Lur’e problem for sliding mode control and chattering reduction,” IEEE Transactions on Automatic Control, vol.44, no.3, pp.563-568, January 1999. (SCI)
      1. 174.
      2. C.L. Lin, “On stability of linear uncertain descriptor systems,” Journal of The Franklin Institute, vol.336, pp.549-564, January 1999. (SCI)
      1. 175.
      2. C.L. Lin and C.Y. Chung, “Stability of linear constrained dynamical systems with modeling uncertainty,” Journal of the Chinese Society of Mechanical Engineers, vol.20, no.1, pp.87-95, January 1999. (EI)
      1. 176.
      2. C.L. Lin, V.T. Liu and H.W. Su, “Design of fuzzy logic-based guidance and control systems,” Journal of the Chinese Fuzzy Systems Association, vol.4, no.2, pp.1-14, January 1998.
      1. 177.
      2. C.L. Lin and T.J. Chen, “Recurrent neural networks for stability verification of uncertain singular systems,” Journal of Control Systems and Technology, vol.6, no.2, pp.25-35, January 1998. (EI)
      1. 178.
      2. C.L. Lin, “Control of perturbed systems using neural networks,” Transactions on Neural Networks, vol.9, no.5, pp.1046-1050, January 1998. (SCI)
      1. 179.
      2. C.L. Lin, “Synthesis of real-time robust flexible structure controllers,” AIAA Journal of Guidance, Control, and Dynamics, vol.21, no.6, pp.1001-1004, January 1998. (SCI)
      1. 180.
      2. C.L. Lin, “Stabilizing control of discrete-time singularly perturbed systems,” International Journal of Systems Science, vol.27, no.12, pp.1473-1482, January 1996. (SCI)
      1. 181.
      2. C.L. Lin and V.T. Liu, “tability and performance analyses of radome refraction slope errors and time-to-go on aerodynamically controlled missiles,” Transactions of the Aeronautical and Astronautical Society of the Republic of China, vol.28, no.1, pp.71-80, January 1996.
      1. 182.
      2. C.L. Lin, “On the study of nonlinear behavior for tactical missile systems using statistical linearization technique,” Journal of Feng Chia University, vol.29, no.1, pp.265-283, January 1996.
      1. 183.
      2. C.L. Lin, “Perturbation analysis for flexible system control,” Journal of Guidance, Control, and Dynamics, vol.18, no.3, pp.633-635, January 1995. (SCI)
      1. 184.
      2. C.Y. Chung and C. L. Lin, “A general class of sliding surface for sliding mode control,” IEEE Transactions on Automatic Control, vol.43, no.1, pp.115-119, January 1995. (SCI)
      1. 185.
      2. C.L. Lin, “Design of flexible structure control system using constrained controls,” Transactions of the Aeronautical and Astronautical Society of the Republic of China, vol.26, no.4, pp.319-327, January 1994.
      1. 186.
      2. C.L. Lin and B.S. Chen, “Robust observer-based control of large flexible structures,” ASME Journal of Dynamic Systems, Measurement, vol.116, pp.713-722, January 1994. (SCI)
      1. 187.
      2. C.L. Lin, “Stabilization of singularly perturbed large-scale interconnected discrete-time systems,” Journal of The Franklin Institute, vol.331B, no.4, pp.329-344, January 1994. (SCI)
      1. 188.
      2. V.T. Liu and C.L. Lin, “Robust stabilization for composite observer-based control of discrete systems,” Automatica, vol.30, no.5, pp.877-881, January 1994. (SCI)
      1. 189.
      2. C.L. Lin, “Robust design criteria for active control of flexible systems,” International Journal of Systems Science, vol.25, no.3, pp.483-501, January 1994. (SCI)
      1. 190.
      2. C.L. Lin and V.T. Liu, “Stabilization of flexible systems under a certain class of nonlinear feedback controls,” Transactions of Nanging University of Aeronautics and Astronautics, vol.10, no.1, pp.25-29, January 1993.
      1. 191.
      2. C.L. Lin and V.T. Liu, “Synthesis of generalized model matching controller and its application to autopilot design,” Transactions of the Aeronautical and Astronautical Society of the Republic of China, vol.25, no.2, pp.129-142, January 1993.
      1. 192.
      2. C.L. Lin and V.T. Liu, “Robustness of feedback control for discrete two-time-scale systems,” Journal of the Chinese Institute of Engineers, vol.16, no.5, pp.709-719, January 1993. (SCI)
      1. 193.
      2. C.L. Lin, “Robust control of flexible structures using residual mode filters,” Journal of Guidance, Control, and Dynamics, vol.16, no.5, pp.973-977, January 1993. (SCI)
      1. 194.
      2. V.T. Liu and C.L. Lin, “Application of generalized model matching control for missile autopilot design,” Journal of Technology, vol.8, no.2, pp.237-246, January 1993.
      1. 195.
      2. C.L. Lin, F.B. Hsiao, L. R. Tsuei, and B. S. Chen, “controller design of a single-link robot arm,” Journal of the Chinese Institute of Engineers, vol.16, no.2, pp.171-193, January 1993. (SCI)
      1. 196.
      2. C.L. Lin and B.S. Chen, “On the design of stabilizing controllers for singularly perturbed systems,” IEEE Transactions on Automatic Control, vol.AC-37, no.11, pp.1828-1834, January 1992. (SCI)
      1. 197.
      2. B.S. Chen, C.L. Lin, and F.B. Hsiao, “Robust observer-based control of a vibrating beam,” IME Journal of Mechanical Science Engineering, vol.205, no.C2, pp.77-89, January 1991. (SCI)
      1. 198.
      2. C.L. Lin, B.S. Chen, and F.B. Hsiao, “On stability and stabilization of mechanical structures under nonlinear time-varying perturbations,” Journal of Applied Mechanics, vol.58, no.2, pp.527-535, January 1991. (SCI)
      1. 199.
      2. F.B. Hsiao and C.L. Lin, “Model matching systems: necessary and sufficient conditions for stability under plant perturbations,” International Journal of Systems Science, vol.22, no.5, pp.1991, January 1991. (SCI)
      1. 200.
      2. B.S. Chen and C.L. Lin, “On the stability bounds of singularly perturbed systems,” IEEE Transactions on Automatic Control, vol.AC-35, no.11, pp.1265-1270, January 1990. (SCI)
      1. 201.
      2. C.L. Lin, F.B. Hsiao, and B.S. Chen, “condition for flexible structure control with mode residualization,” AIAA Journal of Guidance, Control, and Dynamics, vol.13, no.6, pp.1160-1163, January 1990. (SCI)
      1. 202.
      2. C.L. Lin, F.B. Hsiao, and B.S. Chen, “Stabilization of large structural systems under mode truncation, parameter perturbations, and actuator saturations,” International Journal of Systems Science, vol.20, no.8, pp.1423-1440, January 1990. (SCI)
      1. 203.
      2. B.S. Chen and C.L. Lin, “Robust controllers for multivariable model matching systems,” International Journal of Control, vol.50, no.5, pp.1717-1730, January 1989. (SCI)
      1. 204.
      2. Y. C. Lin, C. L. Lin, W. C. Shi and S. W. Huang, “Dither-based compensating strategy for radome boresight error and gimbal friction,” Aeronautical Journal,, vol.112, no.1138, .
      1. 205.
      2. C. L. Lin, Y. H. Li and N. Aouf, “Potential-field-based evolutionary route planner for the control of multiple UAVs,” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol.224, pp.1229-1242, . (SCI)
      1. 206.
      2. C. C. Yang and C. L. Lin, “Adaptive sliding mode control for chaotic synchronization of oscillator with input nonlinearity,” International Journal of Vibration and Control, . (SCI)
      1. 207.
      2. Y. C. Liu, C. L. Lin and C. H. Chuang, “An Approach for model reduction of biochemical networks,” Computational Biology Journal, .
    2. B.研討會論文
      1. 1.
      2. Y. C. Chen, Y. C. Chang, W. C. Yu and C. L. Lin, “Regenerative braking-driving control system,” Proceedings of IEEE Conference on Industrial Electronics and Applications, January 2018.
      1. 2.
      2. H. S. Jian, J. J. Kao and C. L. Lin, “Adaptive wireless power charging system,” Proceedings of IEEE Conference on Industrial Electronics and Applications, January 2018.
      1. 3.
      2. C. L. Lin, E. P. Chen, Y. C. Chen and M. K. Liu, “New design of integrated driving and braking control system for electric vehicles,” Proceedings of IEEE Conference on Industrial Electronics and Applications, January 2017.
      1. 4.
      2. C. C. Huang, H. H. Jian, J. J. Kao and C. L. Lin, “New design of wireless power and bidirectional data transmission,” Proceedings of IEEE Conference on Industrial Electronics and Applications, January 2017.
      1. 5.
      2. Y. Y. Chen, C. L. Lin and C. L. Chen, “Biometrics authentication using ECG measurement,” Proceedings of CACS International Automatic Control Conference, January 2017.
      1. 6.
      2. P. Suebsaiprom and C. L. Lin, “Sliding mode path tracking control for fish-robot under ocean current perturbation,” Proceedings of IEEE International Conference on Control & Automation, pp.972-977, January 2016.
      1. 7.
      2. C. L. Lin and Y. J. Hu, “On the design of static genetic memory,” Proceedings of IEEE Conference on Industrial Electronics and Applications, pp.1891-1896, January 2016.
      1. 8.
      2. C. C. Huang, Y. K. Wu and C. L. Lin, “Transmission of power and data for contactless dynamic charging,” Proceedings of IEEE International Conference on Industrial Technology, pp.208-214, January 2016.
      1. 9.
      2. Changchen Zhao, C. L. Lin and Wehai H. Chen, “Maximal margin feature mapping via basic image descriptors for image classification,” Proceedings of IEEE International Conference on Industrial Technology, pp.775-780, January 2016.
      1. 10.
      2. M. K. Liu and C. L. Lin, “Integrated driving-braking control design for electric bikes,” Proceedings of CACS International Automatic Control Conference, pp.353-358, January 2016.
      1. 11.
      2. C. H. Tu, C. L. Lin, E. P. Chen, Y. C. Chen and C. A. Chen, “New driving/braking control for electric bikes,” Proceedings of CACS International Automatic Control Conference, pp.347-352, January 2016.
      1. 12.
      2. A. Engkaninan and C. L. Lin, “Adaptive Cross Coupling Control for CNC Machines,” Proceedings of CACS International Automatic Control Conference, Ilan, January 2015.
      1. 13.
      2. M. H. Lu, C. L. Lin and Y. J. Shen, “Motor Control Using FSK Modulation in Power Line Communication Network,” Proceedings of CACS International Automatic Control Conference, Ilan, January 2015.
      1. 14.
      2. T. Jennawasin, M. Kawanishi, T. Narikiyo and C. L. Lin, “Guaranteed cost synthesis for polynomial systems using rational Lyapunov functions,” Proceedings of IEEE International Conference on Control & Automation, Taichung, January 2014.
      1. 15.
      2. P. Suebsaiprom and C. L. Lin, “Nonlinear H-inf guidance and control for fish-robot,” Proceedings of IEEE International Conference on Control & Automation, Taichung, January 2014.
      1. 16.
      2. C. H. Huang, C. S. Lee and C. L. Lin, “Flight path planning simulation for VTUAV,” Proceedings of IEEE International Conference on Control & Automation, Taichung, January 2014.
      1. 17.
      2. P. K. Chen and C. L. Lin, “Synthesizing gene clock with toggle switch and oscillator,” Proceedings of IEEE International Conference on Control & Automation, Taichung, January 2014.
      1. 18.
      2. C. H. Chuang, P. K. Chen and C. L. Lin, “Realization of synthesizing genetic clocks based on synthetic genetic oscillators,” Proceedings of IEEE International Conference on Control & Automation, Taichung, January 2014.
      1. 19.
      2. P. M. Hsu and C. L. Lin, “Active queue management in wireless networks by using nonlinear extended network disturbance,” Proceedings of IFAC World Congress, Cape Town, January 2014.
      1. 20.
      2. A. Engkaninan and C. L. Lin, “Adaptive PID control for multi-Axis CNC machines,” Proceedings of CACS International Automatic Control Conference, Kaohsiung, January 2014.
      1. 21.
      2. A. Engkaninan and C. L. Lin, “Adaptive control for multi-axis multi-tasking CNC machine,” Proceedings of International Forum on Systems and Mechatronics, Tainan, January 2014.
      1. 22.
      2. C. H. Chuang and C. L. Lin, “Synthesis of clock signal from genetic oscillator,” Proceedings of Asia Pacific Symposium on Intelligent and Evolutionary Systems, Singapore, January 2014.
      1. 23.
      2. Y. J. Tsai, C. L. Lin, M. T. Wu and C. S. Shen, “Development of flight path Planning for multirotor aerial vehicles,” Proceedings of Memorial Symposium for Prof. Fei-Bin Hsiao, Kaohsiung, January 2014.
      1. 24.
      2. C. L. Lin, M. T. Wu, C. S. Shen, T. Y. Kuo and Y. C. Hu, “以NARX進行旋翼機之實機系統鑑別,” Proceedings of the 31st National Conference on Mechanical Engineering, Taichung, January 2014.
      1. 25.
      2. C. L. Lin, M. T. Wu, C. S. Shen, T. Y. Kuo, Y. C. Hu, C. H. Wu and H. P. Chang , “System identification for helicopters,” Proceedings of Symposium on Science and Technology of National Defense, Taoyuan, January 2014.
      1. 26.
      2. C. L. Lin, W. T. Chang and M. H. Lu, “MAC throughput improvement by adaptive contention window in HomePlug AV,” Proceedings of CACS International Automatic Control Conference, Kaohsiung, January 2014.
      1. 27.
      2. W. T. Cheng and C. L. Lin, “Dynamic model of CSMA/CA in power-line communication,” Proceedings of National Symposium on Systems Science and Engineering, January 2013.
      1. 28.
      2. M. Daouda, C. S. Lee, C. L. Lin and C. C. Yang, “Model Predicative Control for Hybrid Stepper Motors,” Proceedings of National Symposium on Systems Science and Engineering, Ban-Chiao, January 2013.
      1. 29.
      2. P. K. Chen and C. L. Lin, “Synthesizing Periodic Triggering Signals With Genetic Oscillators Using Fourier Series,” Proceedings of National Symposium on Systems Science and Engineering, Ban-Chiao, January 2013.
      1. 30.
      2. P. M. Hsu and C. L. Lin, “Robust Asymptotic Stability of Linear Time-Varying Uncertain System with Respect to its State Mean,” Proceedings of CACS International Automatic Control Conference, Nantou, Taiwan, January 2013.
      1. 31.
      2. P. M. Hsu and C. L. Lin, “Improved Input-Output Finite-Time Stability Analysis of Linear Time-varying Systems,” Proceedings of SICE, Nagoya, January 2013.
      1. 32.
      2. P. M. Hsu and C. L. Lin, “Noise Rejection of Nonlinear Systems with Measurement Noises,” Proceedings of IEEE Conference on Industrial Electronics and Applications, Melbourne, pp.381-386, January 2013.
      1. 33.
      2. P. Suebsaiprom and C. L. Lin, “2-DOF Barycenter Mechanism for Stabilization of Fish-Robots,” Proceedings of IEEE Conference on Industrial Electronics and Applications, Melbourne, pp.1199-1122, January 2013.
      1. 34.
      2. C. L. Lin, C. S. Shen and S. L. Hsieh, “On the development of ballistic target model with variable trajectory (2/2),” Proceedings of Symposium on Science and Technology of National Defense, Taoyuan, Taiwan, January 2013.
      1. 35.
      2. C. L. Lin, Y. P. Lin and S. L. Hsieh, “On the Development of ballistic target model with variable trajectory (1/2),” Proceedings of Symposium on Science and Technology of National Defense, Taoyuan, Taiwan, January 2012.
      1. 36.
      2. Y. C. Chang, C. L. Lin and T. Jennawasin, “Design of robust synthetic genetic oscillators based on RSGA,” Proceedings of IFAC Symposium on Robust Control Design, Aalborg, pp.121-126, January 2012.
      1. 37.
      2. T. Jennawasin, M. Kawanishi, T. Narikiyo and C. L. Lin, “An improved stabilizing condition for polynomial systems with bounded actuators,” Proceedings of IEEE Multi-Conference on Systems and Control, Dubrovnik, pp.258-263, January 2012.
      1. 38.
      2. P. M. Hsu and C. L. Lin, “Time-delay compensation using nonlinear extended network disturbance,” Proceedings of IEEE Multi-Conference on Systems and Control, Dubrovnik, pp.1400-1404, January 2012.
      1. 39.
      2. C. H. Chuang and C. L. Lin, “Modeling of synthetic biological oscillators based on S-system model,” Proceedings of CACS International Automatic Control Conference, Huwei, Taiwan, January 2012.
      1. 40.
      2. W. C. Lin, C. L. Lin and W. C. Tu, “ABS control for two-wheel drive electric scooters with braking force distribution,” Proceedings of CACS International Automatic Control Conference, Huwei, Taiwan, January 2012.
      1. 41.
      2. P. Suebsaiprom and C. L. Lin, “Fish-tail modeling for fish robot ,” Proceedings of IEEE International Symposium on Computer, Consumer and Control, , Taichung, Taiwan, January 2012.
      1. 42.
      2. B. R. Ke, C. L. Lin and H. H. Chien, “Improvement of freight train timetable for single-track railway system,” Proceedings of IEEE International Symposium on Computer, Consumer and Control, Taichung, Taiwan, January 2012.
      1. 43.
      2. Y. H. Hsu, C. L. Lin, C. K. Chen, C. T. Chiang and W. T. Yang, “Health care platform based on acquisition of ECG for HRV analysis,” Proceedings of IEEE International Conference on Industrial Informatics, Beijing, pp.464-469, January 2012.
      1. 44.
      2. Y. J. Tsai and C. L. Lin, “Path planning for UAV in three-dimensional environment,” Proceedings of National Symposium on System Science and Engineering, Keelung, pp.568-571, January 2012.
      1. 45.
      2. C. L. Lin, Y. P. Lin and S. L. Hsieh, “Estimation of evasive acceleration for maneuverable ballistic targets,” Proceedings of National Symposium on System Science and Engineering, Keelung, pp.700-705, January 2012.
      1. 46.
      2. W. C. Lin and W. C. Lin, “ABS control design for two-wheel drive electric vehicles,” Proceedings of National Symposium on System Science and Engineering, Keelung, pp.522-525, January 2012.
      1. 47.
      2. S. P. Hsu, C. L. Lin and J. Y. Wu, “Balancing charge/discharge management for series/parallel battery packs,” Proceedings of IEEE Conference on Industrial Electronics and Applications, Singapore, pp.600-605, January 2012.
      1. 48.
      2. C. H. Yu and C. L. Lin, “A novel algorithm to achieve bandwidth fairness of RED with packet size consideration,” Proceedings of IEEE Conference on Industrial Electronics and Applications, Singapore, pp.646-649, January 2012.
      1. 49.
      2. P. M. Hsu and C. L. Lin, “Time-delay compensation for time-varying delayed systems using extended network disturbance,” Proceedings of IEEE Conference on Industrial Electronics and Applications, Singapore, pp.380-385, January 2012.
      1. 50.
      2. Y. H. Yang, C. L. Lin, H. C. Lin and M. T. Wu, “數位化多模組電能轉換系統,” Proceedings of the 29st National Conference on Mechanical Engineering, Kaohsiung, Taiwan, R.O.C, January 2012.
      1. 51.
      2. B. C. Chen and C. L. Lin, “Implementation of maximum-power-point-tracker for photovoltaic arrays,” Proceedings of IEEE Conference on Industrial Electronics and Applications, Beijing, January 2011.
      1. 52.
      2. C. K. Chen, C. L. Lin and Y. M. Chiu, “Individual identification based on chaotic electrocardiogram signals,” Proceedings of IEEE Conference on Industrial Electronics and Applications, Beijing, January 2011.
      1. 53.
      2. P. M. Hsu and C. L. Lin, “Congestion control concerning queue oscillation avoidance in local wireless networks,” Proceedings of International Conference on Computers, Communications, Control and Automation, Hong Kong, pp.396-399, January 2011.
      1. 54.
      2. C. H. Chuang and C. L. Lin, “Stability analysis for state estimation of noisy gene networks,” Proceedings of IFAC World Congress, Milan, pp.6242-6247, January 2011.
      1. 55.
      2. Y. C. Chang and C. L. Lin, “Design of synthetic genetic oscillators based on RSG,” Proceedings of IEEE International Conference on Bioinformatics and Bioengineering, Taichung, pp.282-286, January 2011.
      1. 56.
      2. C. L. Lin, Y. P. Lin and S. L. Hsieh, “Estimation of higher-tier targets and analysis of specifications (2/2),” Proceedings of Symposium on Science and Technology of National Defense, Taoyuan, Taiwan, January 2011.
      1. 57.
      2. Y. Y. Chen, C. L. Lin, C. W. Huang, and Y. P. Lin, “An advanced estimation design for high speed reentry targets,” Proceedings of Asian Control Conference, Kaohsiung, Taiwan, pp.470-475, January 2011.
      1. 58.
      2. Y. P. Lin, C. L. Lin, C. W. Huang, and Y. Y. Chen, “Trajectory estimation of higher-tier ballistic targets,” Proceedings of Asian Control Conference, Kaohsiung, Taiwan, pp.476-481, January 2011.
      1. 59.
      2. C. L. Lin and M. Y. Yang, “Design of anti-lock braking system for electric vehicles via short-circuit braking,” Proceedings of International Conference on Mechanic Automation and Control Engineering, Inner Mongolia, China, pp.1176-1179, January 2011.
      1. 60.
      2. C. L. Lin and W. C. Lin, “ABS control design for two-wheel drive electric vehicles,” Proceedings of International Conference on Mechanic Automation and Control Engineering, Inner Mongolia, China, pp.1011-1014, January 2011.
      1. 61.
      2. P. M. Shiu and C. L. Lin, “Point stabilization for autonomous lawnmower using backstepping adaptive control,” Proceedings of IEEE International Conference on Industrial Technology, Valparaiso, Chile, January 2010.
      1. 62.
      2. P. M. Shiu and C. L. Lin, “Congestion control for large-scale wired network using time-delay compensator,” Proceedings of IEEE Conference on Industrial Electronics and Applications, Taichung, pp.175-180, January 2010.
      1. 63.
      2. C. K. Chen, C. L. Lin and Y. M. Chiu, “Text encryption using ECG signals with chaotic logistic map information,” Proceedings of IEEE International Conference on Industrial Electronics and Applications, Taichung, pp.1741-1746, January 2010.
      1. 64.
      2. B. R. Ke, C. P. Wang, C. L. Lin and Y. K. Wu, “Fuel-efficient driving strategies for highway vehicles,” Proceedings of IEEE Conference on Industrial Electronics and Applications, Taichung, pp.200-2075, January 2010.
      1. 65.
      2. Y. K. Wu, C. L. Lin, B. R. Ke, Y. K. Hunag and K. W. Hsu, “Development of an industrial forecasting tool in wind powe,” Proceedings of IEEE Conference on Industrial Electronics and Applications, Taichung, pp.614-619, January 2010.
      1. 66.
      2. C. H. Juang and C. L. Lin, “Estimation of noisy gene regulatory networks,” Proceedings of SICE Annual Conference, Taipei, January 2010.
      1. 67.
      2. Y. C. Liu and C. L. Lin, “Model reduction of biochemical networks,” Proceedings of SICE Annual Conference, Taipei, January 2010.
      1. 68.
      2. C. K. Chen, C. L. Lin and Y. M. Chiu, “Data encryption using ECG signals with chaotic Henon map,” Proceedings of International Conference on Information Science and Applications, Seoul, Korea, pp.396-400, January 2010.
      1. 69.
      2. P. M. Hsu and C. L. Lin, “Congestion control for local wireless sensor network using time-delay compensator,” Proceedings of International Power Electronics Conference, Sapporo, Japan, pp.1359-1362, January 2010.
      1. 70.
      2. C. T. Huang, C. L. Lin and C. S. Lee, “Efficient energy management for electrical scooters,” Proceedings of IEEE International Conference on Computational Technologies in Electrical and Electronics Engineering, Siberia, Russia, January 2010.
      1. 71.
      2. C. L. Lin, Y. P. Lin and C. W. Huang, “Estimation of higher-tier targets and analysis of specifications (1/2),” Proceedings of Symposium on Science and Technology of National Defense, Taoyuan, Taiwan, January 2010.
      1. 72.
      2. C. H. Huang and C. L. Lin, “Construction of fuzzy control rules for model supporting system in water tunnel,” Proceedings of the 18th National Conferences on Fuzzy Theory and Its Applications, Hualian, Taiwan, January 2010.
      1. 73.
      2. C. S. Lee, C. L. Lin, V. T. Liu , C. C. Chen, W. S. Chen, H. J. Lin and J. J. Chan, “Implementation of multi-mini UAV navigation control system,” Proceedings of UAV’10 - International Conference on Unmanned Aerial Vehicles, Dubai UAE, January 2010.
      1. 74.
      2. Y. P. Lin, C. L. Lin and C. W. Huang, “Design of a 3-D Modified Proportional Navigation Guidance Law,” Proceedings of IEEE International Conference on Control and Automation, Xiamen, China, pp.888-891, January 2010.
      1. 75.
      2. B. M. Shiu and C. L. Lin, “Constrained optimal control for wheeled cars,” Proceedings of the International Conference on Autonomous Robots and Agents, Wellington, New Zealand, pp.490495, January 2009.
      1. 76.
      2. C. K. Lee, C. L. Lin and B. M. Shiu, “Autonomous vehicle parking using artificial intelligent approach,” Proceedings of the International Conference on Autonomous Robots and Agents, Wellington, New Zealand, pp.496-501, January 2009.
      1. 77.
      2. Y. C. Lin and C. L. Lin, “Optimal control approach for robust control design of uncertain time-delay systems,” Proceedings of the IEEE International Conference on Industrial Electronics and Applications, Xian, China, pp.53-57, January 2009.
      1. 78.
      2. P. M. Shiu and C. L. Lin, “Stabilizing AQM Control of Large-Scale Network Systems,” Proceedings of CACS 2009 International Automatic Control Conference, Taipei, Taiwan, January 2009.
      1. 79.
      2. C. H. Chuang and C. L. Lin, “State and Parameter Estimation for Noisy Biochemical Systems,” Proceedings of CACS 2009 International Automatic Control Conference, Taipei, Taiwan, January 2009.
      1. 80.
      2. H. D. Yang, Y. K. Wu and C. L. Lin, “應用自適應類神經模糊理論於風力發電之預測研究,” Proceedings of The 17th National Conferences on Fuzzy Theory and Its Applications, Kaohsiung, Taiwan, January 2009.
      1. 81.
      2. C. H. Huang, C. S. Lee and C. L. Lin, “Application of Fuzzified-ERA in Parameter Identification of Mini-UAV LSWT Testing System,” Proceedings of The 17th National Conferences on Fuzzy Theory and Its Applications, Kaohsiung, Taiwan, January 2009.
      1. 82.
      2. C. D. Huang and C. L. Lin, “高效率電動機車電能回充控制器設計,” Proceedings of the 26th National Conference on Mechanical Engineering, Tainan, Taiwan, January 2009.
      1. 83.
      2. V. T. Liu, C.L. Lin and C.Y. Chen, “Mini-UAV多目標偵測與追蹤導控系統,” Proceedings of Symposium on Science and Technology of National Defense, Taoyuan, Taiwan, pp.59-64, January 2009.
      1. 84.
      2. C. L. Lin, Y. P. Lin and C. W. Huang, “中高層飛彈導引律設計與分析(II),” Proceedings of Symposium on Science and Technology of National Defense,, Taoyuan, Taiwan, pp.141-148, January 2009.
      1. 85.
      2. C. S. Lee, C. L. Lin, V. T. Liu, C. C. Chen, W. S. Chen and F. R. Lin, “小型無人飛行載具之多機導控系統開發與飛試驗證,” Proceedings of AASRC/CSCA Joint Conference, Taipei, January 2009.
      1. 86.
      2. P. M. Shiu and C. L. Lin, “Planner for Lawn Mowers,” Proceedings of IEEE SMC UK-RI Chapter Conference, Birmingham, pp.270-276, January 2009.
      1. 87.
      2. C. K. Lee and C. L. Lin, “Autonomous vehicle parking using Petri net-based hybrid artificial intelligent approach,” Proceedings of The 16th National Conferences on Automation Technology, Kaohsiung, Taiwan, pp.792-97, January 2008.
      1. 88.
      2. B. M. Shiu and C. L. Lin, “Design of an autonomous lawn mower with optimal route planning,” Proceedings of IEEE International Conference on Industrial Technology,, Chengdu, China, January 2008.
      1. 89.
      2. S. L. Hsiao and C. L. Lin, “Control design of emulated human posture for balance,” Proceedings of CACS 2008 International Automatic Control Conference, Tainan, Taiwan, January 2008.
      1. 90.
      2. M. T. Wu and C. L. Lin, “Design and implement wind turbine generators system with fuzzy sliding mode controller,” Proceedings of CACS 2008 International Automatic Control Conference,, Tainan, Taiwan, January 2008.
      1. 91.
      2. M. T. Wu and C. L. Lin, “Design and implement wind turbine generators system with fuzzy sliding mode controller,” Proceedings of CACS 2008 International Automatic Control Conference, Tainan, Taiwan, January 2008.
      1. 92.
      2. M. T. Wu and C. L. Lin, “Design and implement wind turbine generators system with fuzzy sliding mode controller,” Proceedings of CACS 2008 International Automatic Control Conference, Tainan, Taiwan, January 2008.
      1. 93.
      2. Y. P. Lin and C. L. Lin, “Guidance design for vertical launch missiles,” Proceedings of CACS 2008 International Automatic Control Conference, Tainan, Taiwan, January 2008.
      1. 94.
      2. Y. W. Liu, C. H. Juang and C. L. Lin, “Analysis and control design for signal transduction networks,” Proceedings of CACS 2008 International Automatic Control Conference, Tainan, Taiwan, January 2008.
      1. 95.
      2. B. R. Ke, C. C. Yang and C. L. Lin, “Online optimization of train driving strategy in mass rapid transit systems,” Proceedings of The 13th Conference of Vehicle Engineering, Taishan, Taiwan, January 2008.
      1. 96.
      2. C. H. Huang, H. Y. Jan, C. L. Lin and C.S. Lee, “Control design using DNA computing approach,” Proceedings of International Symposium on Biomedical Engineering, Taoyuan, Taiwan, January 2008.
      1. 97.
      2. C. H. Huang, H. Y. Jan, C. L. Lin, “System identification using DNA computing approach,” Proceedings of the 7th WSEAS Int. Conf. on COMPUTATIONAL INTELLIGENCE, MAN-MACHINE SYSTEMS and CYBERNETICS, Cairo, pp.19-24, January 2008.
      1. 98.
      2. Y. W. Liu, C. K. Chen and C. L. Lin, “Signal transduction networks in biological systems based on Michaelis-Menten Equation and S-System,” Proceedings of the 7th WSEAS Int. Conf. on COMPUTATIONAL INTELLIGENCE, MAN-MACHINE SYSTEMS and CYBERNETICS, Cairo, Egypt, pp.25-28, January 2008.
      1. 99.
      2. B. R. Ke, M.C. Chen and C. L. Lin, “Optimization of train-speed trajectory and control for energy saving of mass rapid transit systems,” Proceedings of The 15th National Conferences on Fuzzy Theory and Its Applications, Yunlin, Taiwan, January 2007.
      1. 100.
      2. C. H. Chen, C. L. Lin, V. T. Liu and H. C. Huang, “Realization of stabilizing network control systems for round-trip time delays,” Proceedings of IEEE International Conference on Control and Automation, Guangzhou, China, January 2007.
      1. 101.
      2. C. L. Li, Y. C. Lin and C. L. Lin, “Analysis and control design for human postural balancing systems,” Proceedings of the 7th IFAC Symposium on Nonlinear Control Systems, Pretoria, South Africa, pp.790-795, January 2007.
      1. 102.
      2. B. R. Ke, M. C. Chen and C. L. Lin, “Block-layout design for saving energy of mass rapid transit systems,” Proceedings of the 15th National Conference on Fuzzy Theory and Its Applications, January 2007.
      1. 103.
      2. C. S. Chen and C. L. Lin, “A fast MPPT method for photovoltaic arrays,” Proceedings of CACS International Automatic Control Conference, Taichung, Taiwan, January 2007.
      1. 104.
      2. M. W. Hong, C. L. Lin and C. H. Chen, “Implementation and Realization of Network Control Stabilization in Pneumatic Systems with Time-Delays,” Proceedings of CACS International Automatic Control Conference, Taichung, Taiwan, January 2007.
      1. 105.
      2. C. L. Lin, M. T. Wu, Y. H. Li and T. C. Kao, “Potential-field-based evolutionary route planner for UAV,” Proceedings of 2007 CACS International Automatic Control Conference, Taichung, Taiwan, January 2007.
      1. 106.
      2. Y. W. Liu, C. W. Tsai, J. F. Lin and C. L. Lin, “Optimal design of digital IIR filters using real structured genetic algorithm,” Proceedings of International Conference on Computational Intelligence and Multimedia Applications, Tamil Nadu, India, January 2007.
      1. 107.
      2. M. W. Hong, C. L. Lin and C. H. Chen, “Stabilizing network control for pneumatic systems with time-delays,” Proceedings of International Conference on Computational Intelligence and Multimedia Applications, Tamil Nadu, India, January 2007.
      1. 108.
      2. Y. W. Liu and C. L. Lin, “Idea of control design for cellular signal transduction pathway of Ras,” Proceedings of International Conference on Computational Intelligence and Multimedia Applications, Tamil Nadu, India, January 2007.
      1. 109.
      2. B. R. Ke, C. L. Lin and C. W. Lai, “Optimization of train-speed trajectory and control for energy saving of mass rapid transit systems,” Proceedings of The 12th Conference of Vehicle Engineering, Pingtung, Taiwan, January 2007.
      1. 110.
      2. Y. C. Lin, C. L. Lin and C. C. Yang, “Optimal design for robust active pantograph of a light rail vehicle using an evolutionary search,” Proceedings of the 8th International Symposium on Advanced Vehicle Control, Glasgow, UK, January 2006.
      1. 111.
      2. Y. C. Lin, C. L. Lin and C. C. Yang, “Robust active vibration control of rail vehicle pantograph,” Proceedings of International Control Conference, Glasgow, UK, January 2006.
      1. 112.
      2. C. W. Tsai, C. L. Lin and T. W. Lin, “Realization of FPGA/CPLD based servo controller for MBDCM,” Proceedings of International Control Conference, Glasgow, UK, January 2006.
      1. 113.
      2. H. Y. Jan, C. L. Lin, T. S. Hwang and C. H. Huang, “Solving cross-coupling problem with artificial neural network for a dual-axes motion platform,” Proceedings of International Control Conference, Glasgow, UK, January 2006.
      1. 114.
      2. H. C. Huang, C. L. Lin, and C. H. Chen, “Realization of stabilizing network control schemes with uncertain time-varying communication delays,” Proceedings of Asian Control Conference, Bali, Indonesia, pp.749-754, January 2006.
      1. 115.
      2. T. W. Lin, C. L. Lin, M. T. Wu, and H. Y. Jan, “Design of Kalman filter for piezoelectric vibration gyroscope,” Proceedings of Asian Control Conference, Bali, Indonesia, pp.1117-1121, January 2006.
      1. 116.
      2. B. R. Ke, N. Chen, C. L. Lin, and C. W. Lai, “高運量捷運列車之最佳速度線形,” Proceedings of the 27th Symposium on Electrical Power Engineering, Hsinchu, Taiwan, R.O.C, January 2006.
      1. 117.
      2. V. T. Liu, C. L. Lin, H. C. Huang, and Z. J. Jian, “A novel micro-positioning controller for piezoelectric actuators,” Proceedings of International Conference on Intelligent Computing, Kunming, China, pp.440-445, January 2006.
      1. 118.
      2. C. S. Chen and C. L. Lin, “一種改進電動機車電能效率之設計,” Proceedings of Taiwan Power Electronics Conference, Yunlin, Taiwan, R.O.C, pp.373-378, January 2006.
      1. 119.
      2. C. L. Lin, W. C. Chang and C. H. Chen, “New dither-based friction compensation scheme,” Proceedings of 2006 CACS Automatic Control Conference, Tamsui, Taiwan, pp.664-667, January 2006.
      1. 120.
      2. C. N. Chen and C. L. Lin, “A robust nonlinear speed controller for an electric scooter,” Proceedings of 2006 CACS Automatic Control Conference, Tamsui, Taiwan, pp.415-420, January 2006.
      1. 121.
      2. C.L. Lin, K.M. Chen, C. K. Lee and T. C. Kao, “Design of adaptive spline missile guidance law,” Proceedings of International Conference on Modeling, Identification, and Control, Lanzarote, Spain, pp.360-365, January 2006.
      1. 122.
      2. Y. C. Lin, C. L. Lin and N. C. Shieh, “Robust optimal design for active pantograph of a light rail vehicle using evolutionary search,” Proceedings of International Conference on Modeling, Identification, and Control, Lanzarote, Spain, pp.396-401, January 2006.
      1. 123.
      2. C. L. Lin, K. M. Chen and T. C. Kao, “Adaptive S-4 spline guidance design,” Proceedings of CACS Automatic Control Conference, Tainan, Taiwan, R.O.C, January 2005.
      1. 124.
      2. Z. J. Jian, C.L. Lin, V. T. Liu and H. Z. Huang, “含壓電致動器之微定位平台控制設計,” Proceedings of CACS Automatic Control Conference, Tainan, Taiwan, R.O.C, January 2005.
      1. 125.
      2. H. Y. Jan, C. L. Lin, C. H. Hwang and C. K. Chen, “Decoupling control design for dual axes platforms,” Proceedings of International Conference on Advanced Manufacture, Taipei, Taiwan, R.O.C, January 2005.
      1. 126.
      2. Y. C. Lin, C. L. Lin and N. C. Shieh, “A hybrid evolutionary approach for robust active suspension design of light rail vehicles,” Proceedings of 22th National Conference on Mechanical Engineering, Chungli, Taiwan, R.O.C, January 2005.
      1. 127.
      2. H. Y. Jang, C. L. Lin and J. R. Lin, “Optimal path planning of a dynamic platform for spatial disorientation ,” Proceedings of 2005 AASRC/CCAS Joint Conference, Kaohsiung, Taiwan, R.O.C, January 2005.
      1. 128.
      2. H.Y. Jan, M.Z. Wu, C.N. Chen, T. W. Lin and C.L. Lin, “Implement of intelligent servo controllers for micro brushless DC motors,” Proceedings of The 8th International Conference on Automation, Taichung, Taiwan, R.O.C, January 2005.
      1. 129.
      2. C.H. Chen, C.L. Lin, H.C. Huang and V.T. Liu, “Stability of interconnected network control scheme with uncertain time-varying communication delays,” Proceedings of The 8th International Conference on Automation, Taichung, Taiwan, R.O.C, January 2005.
      1. 130.
      2. C. L. Lin and T. L. Wang, “A fuzzifized vertical launched missile guidance against hypensonic target,” National Conference on Fuzzy Theory and Its Applications, Ilan, Taiwan, R.O.C, January 2005.
      1. 131.
      2. C. L. Lin and K. M. Chen, “Missile guidance design using optimal guidance design using optimal trajectory shaping and neural networks,” Proceedings of 16th IFAC World Congress, Prague, Czech, January 2005.
      1. 132.
      2. Y. C. Lin, J. R. Lin and H. J. Jan, “Optimal path planning for a dynamic platform,” Proceedings of 16th IFAC World Congress, Prague, Czech, January 2005.
      1. 133.
      2. Y. C. Lin, C. L. Lin, N. C. Shieh and N. J. Lin, “Optimal active suspension design of rail vehicles using evolutionary approach,” Proceedings of International Conference on Artificial Intelligence and Applications, Innsbruck, Austria, January 2005.
      1. 134.
      2. C. L. Lin, C. H. Chen, V. T. Liu and T. S. Hwang, “Time-delay compensation and disturbance rejection for pneumatic systems,” Proceedings of International Conference on Artificial Intelligence and Applications, Innsbruck, Austria, January 2005.
      1. 135.
      2. N.C. Chiang, C. L. Lin and G.K. Jiang, “應用智慧型控制器於油壓伺服位置控制,” The 21st National Conference on Mechanical Engineering, Kaohsiung, Taiwan, R.O.C, January 2004.
      1. 136.
      2. C. L. Lin and T. L. Wang, “Fuzzy side force control for missile against hypersonic target,” AASRC/CCAS Joint Conference, Taichung, Taiwan, R.O.C, January 2004.
      1. 137.
      2. C. L. Lin, H. Y. Jan and T. S. Hwang, “Self-organizing PID control design based on DNA computing method,” Proceedings of 2004 IEEE International Conference on Control Applications, Taipei, Taiwan, R.O.C, pp.568-573, January 2004.
      1. 138.
      2. C. L. Lin, T. L. Wang and W. C. Shi, “反飛彈導引律設計與鼻錐罩斜率誤差之估測,” 國科會國防科技航空技術學門研究成果發表會, Kaoshiung, Taiwan, R.O.C., January 2004.
      1. 139.
      2. N. C. Chang, C. L. Lin and Z. K. Jiang, “應用Fuzzy-PID小波神經網路於油壓伺服位置控制,” Proceedings of Automation Technology Conference, Taipei, Taiwan, R.O.C., January 2004.
      1. 140.
      2. C. L. Lin, J. R. Lin, H. Y. Jan and N. J. Lin, “Application of DNA computing algorithm on three-dimension path planning problem,” Proceedings of National Symposium on Automatic Control, Zhanhwa, Taiwan, R.O.C., January 2004.
      1. 141.
      2. N. C. Hsieh, C. L. Lin, Y. C. Lin and N. J. Lin, “以進化演算法則輔助輕軌車主動懸吊系統之最佳化設計,” Proceedings of National Symposium on Automatic Control, Zhanhwa, Taiwan, R.O.C., January 2004.
      1. 142.
      2. C. L. Lin, T. S. Hwang, C. T. Liu and Z. J. Jian, “Failure detection and adaptive compensation for fault tolerant flight control systems,” Proceedings of IEEE International Symposium on Industrial Electronics, Ajaccio, France, pp.95-100, January 2004.
      1. 143.
      2. C. L. Lin, C. H. Chen, V. T. Liu and T. S. Hwang, “A new time-delay compensation scheme for hydraulic systems,” Proceedings of IEEE International Symposium on Industrial Electronics, Ajaccio, France, pp.439-644, January 2004.
      1. 144.
      2. C. L. Lin, H. Y. Jan and T. S. Hwang, “Structure variable PID control design based on DNA coding method,” Proceedings of IEEE International Symposium on Industrial Electronics, Ajaccio, France, pp.423-428, January 2004.
      1. 145.
      2. C. L. Lin, J. R. Lin, H. Y. Jan and N. Lin, “Optimal path planning on 3D space using a DNA computing algorithm,” Proceedings of IEEE International Symposium on Industrial Electronics, Ajaccio, France, pp.253-258, January 2004.
      1. 146.
      2. N.C. Hsieh, C. L. Lin, N. J. Lin and Y. C. Lin, “Design for passive suspensors of a light rail vehicle using evolutionary search,” Proceedings of IEEE International Conference on Networking, Sensing and Control, Taipei, Taiwan, pp.134-139, January 2004.
      1. 147.
      2. C.L. Lin and H. Z. Hung, “Fuzzy side force control for missile against hypersonic target,” Proceedings of the 16th IFAC Symposium on Automatic Control in Aerospace, St. Petersburg, Russia, pp.80-84, January 2004.
      1. 148.
      2. C.L. Lin, T.S. Hwang, C.T. Liu, Z.J. Jian, P. Chang and W.J. Chen, “Design for fault tolerant flight control systems,” Proceedings of the 20th National Conference on Mechanical Engineering, Taipei, Taiwan, pp.103-110, January 2003.
      1. 149.
      2. V.T. Liu, C.L. Lin, C.H. Chen and J.R. Chang, “氣壓缸位置之模糊PID控制,” Proceedings of the 20th National Conference on Mechanical Engineering, Taipei, Taiwan, pp.615-621, January 2003.
      1. 150.
      2. C. L. Lin, T. R. Lin and R. C. Tsai, “Singularity characterization and optimal path planning for a mixed linear and rotary motors-based dynamic platform,” Proceedings of the 7th International Conference on Mechatronics Technology, Taipei, Taiwan, pp.191-196, January 2003.
      1. 151.
      2. C.L. Lin, T.S. Hwang, C.T. Liu, P. Chang and W.J. Chen, “Adaptive control, failure detection and fault tolerance for aircraft flight control systems,” Proceedings of National Symposium on Automatic Control, Chungli, Taiwan, R.O.C., January 2003.
      1. 152.
      2. T.S. Hwang, C.L. Lin, M.Y. Liao, P. Chang and C.Y. Ho, “空用容錯電腦複式管理系統之雛型設計與模擬驗證,” Proceedings of National Symposium on Automatic Control, Chungli, Taiwan, R.O.C., January 2003.
      1. 153.
      2. C.L. Lin and H.Z. Hung,, “Development of an integrated fuzzy-logic-based missile guidance law against high speed target,” American Control Conference, Denver, Colorado, January 2003.
      1. 154.
      2. C.L. Lin and C.H. Chen, “Design of a dead time controller for pneumatic systems,” American Control Conference, Denver, Colorado, pp.1715-1720, January 2003.
      1. 155.
      2. C.L. Lin, H.Y. Jan and R.C. Tsai, “Control design for a mixed rotary and linear motors based manipulator,” Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Kobe, Japan, pp.1298-1303, January 2003.
      1. 156.
      2. C.L. Lin and H.Y. Jan, “Application of evolution strategy in mixed control for a linear brushless DC motor,” Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Kobe, Japan, pp.1-6, January 2003.
      1. 157.
      2. C.L. Lin, “On the design of a fuzzy-PD based missile guidance law,” Proceedings of the IEEE 4th International Conference on Control and Automation, Montreal, Canada, pp.7-11, January 2003.
      1. 158.
      2. C.L. Lin, “Development of an integrated fuzzy-logic-based missile guidance law against high speed target (1/3),” 九十年度國科會控制學門研究成果發表會, Taipei, Taiwan, R.O.C., January 2002.
      1. 159.
      2. V.T. Liu, C.L. Lin and G.P. Lee, “Neural net-based identification and control of a thin plate using piezoelectric actuators/sensors,” The 19th National Conference on Mechanical Engineering, Huwei, Taiwan, R.O.C., January 2002.
      1. 160.
      2. C.L. Lin and C.H. Chen, “A novel time-delay compensation scheme for pneumatic systems,” The 19th National Conference on Mechanical Engineering, Huwei, Taiwan, R.O.C., January 2002.
      1. 161.
      2. C.L. Lin and H.Y. Jan, “Multiobjective PID Control for a linear brushless DC motor: an evolutionary approach,” Proceedings of the 28th Annual Conference of the IEEE Industrial Electronics Society, Sevilla, Spain, January 2002.
      1. 162.
      2. R.C. Tsai and C.L. Lin, “Analysis of working space and singularities of a spatial disorientation simulating platform,” Conference on Engineering Technology and Applications of Chinese and Western Medicine, Taichung, Taiwan, pp.103-110, January 2002.
      1. 163.
      2. C.L. Lin, R.C. Tsai and C.H. Chen, “Control design for a linear motors-based dynamic platform,” Proceedings of IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education, Chia Yi, Taiwan, January 2002.
      1. 164.
      2. C.L. Lin and H.Z. Haung, “Development of an integrated fuzzy-logic-based missile guidance law against high speed targets,” Proceedings of IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education, Chia Yi, Taiwan, January 2002.
      1. 165.
      2. C.L. Lin, “On the design of an adaptive fuzzy gain-scheduled autopilot,” Proceedings of American Control Conference, Anchorage, Alaska, pp.1567-1572, January 2002.
      1. 166.
      2. C.L. Lin, G.P. Lee and V.T. Liu, “Identification and control of a benchmark Flexible structure using piezoelectric actuators and sensors,” Proceedings of the 17th IEEE International Symposium on Intelligent Control, Vancouver, Canada, pp.856-861, January 2002.
      1. 167.
      2. H. Y. Jan, C.L. Lin and N.C. Shieh, “Linear DC motor control using GA-based multiobjective PID strategy,” Proceedings of National Symposium on Automatic Control, Tainan, Taiwan, R.O.C., pp.43-49, January 2002.
      1. 168.
      2. M.T. Wu, F.L. Hu and C. L. Lin, “Anti-lock braking system of unmanned aerial vehicle,” The 9th National Conference on Fuzzy Theory and Its Applications, Chungli, Taiwan, R.O.C., CD-ROM, January 2001.
      1. 169.
      2. C.L. Lin, R.M. Lai and H.Z. Haung, “Adaptive fuzzy gain-scheduled missile autopilot design,” The 9th National Conference on Fuzzy Theory and Its Applications, Chungli, Taiwan, R.O.C., CD-ROM, January 2001.
      1. 170.
      2. T.H. Huang, C.L. Lin and R.C. Tsai, “Design of a linear motors based parallel manipulator,” Proceedings of the First Taiwan-Japan Workshop on Mechanical and Aerospace Engineering, Tainan, Taiwan, R.O.C, pp.744-759, January 2001.
      1. 171.
      2. C.L. Lin and T.Y. Lin, “Neural net-based control design,” Proceedings of National Symposium on Automatic Control, Taoyuan, Taiwan, R.O.C., pp.1050-1055, January 2001.
      1. 172.
      2. B.S. Chen, Y.Y. Chen and C.L. Lin, “Constrained mixed guidance law against maneuvering targets based on the Takagi-Sugeno fuzzy models,” Proceedings of National Symposium on Automatic Control, Taoyuan, Taiwan, R.O.C., pp.879-884, January 2001.
      1. 173.
      2. C.L. Lin, G.P. Lee and V.T. Liu, “Identification of a benchmark flexible structure with bonded piezoelectric film actuators and sensors,” The 18th National Conference on Mechanical Engineering, Taipei, Taiwan, R.O.C., January 2001.
      1. 174.
      2. C.L. Lin and V.T. Liu, “Neural net-based design for adaptive optimal control,” Proceedings of National Symposium on Automatic Control, Taoyuan, Taiwan, R.O.C., pp.655-661, January 2001.
      1. 175.
      2. C.L. Lin, H.T. Huang and H.Y. Jang, “On the design of linear servo control schemes using wavelet function networks,” Proceedings of National Symposium on Automatic Control, Taoyuan, Taiwan, R.O.C., pp.240-246, January 2001.
      1. 176.
      2. C.L. Lin and R.M. Lai, “A genetic-fuzzy logic based guidance and control system design,” The 4th Pacific International Conference on Aerospace Science and Technology, Kaohsiung, Taiwan, R.O.C., pp.219-225, January 2001.
      1. 177.
      2. C.L. Lin, V.T. Liu and P.S. Hao, “Robust fuzzy control of a vibrating thin plate,” The 17th National Conference on Mechanical Engineering, Kaohsiung, Taiwan, R.O.C., pp.543-550, January 2000.
      1. 178.
      2. C.L. Lin,, “Application of gain scheduling and fuzzy control in missile guidance and control system design (2/3),” 八十八年度國科會控制學門研究成果發表會, Hsinchu, Taiwan, R.O.C., CD-ROM, January 2000.
      1. 179.
      2. C.L. Lin, “Study and improvement for high-precision servo control theory,” 十八年度國科會控制學門研究成果發表會, Hsinchu, Taiwan, R.O.C., CD-ROM, January 2000.
      1. 180.
      2. C.L. Lin and R.M. Lai, “Parameter design for guidance and control system using genetic approach,” Fifth Conference on Artificial Intelligence and Applications, Taipei, Taiwan, R.O.C., pp.540-547, January 2000.
      1. 181.
      2. C.L. Lin, “Application of gain scheduling and fuzzy control in missile guidance and control system design (1/3),” 八十七年度國科會控制學門研究成果發表會, Hsinchu, Taiwan, R.O.C., CD-ROM, January 2000.
      1. 182.
      2. C.L. Lin, “Realization of real-time Riccati equation-based controller ,” 八十七年度國科會控制學門研究成果發表會, Hsinchu, Taiwan, R.O.C., CD-ROM, January 2000.
      1. 183.
      2. B.S. Chen, Y.Y. Chen and C.L. Lin, “Nonlinear guidance against maneuvering target: Takagi-Sugeno fuzzy model approach,” Proceedings of National Symposium on Automatic Control, Hsinchu, Taiwan, R.O.C., pp.915-920, January 2000.
      1. 184.
      2. C.L. Lin and H.W. Su, “An adaptive fuzzy gain scheduling design for guidance system,” Proceedings of National Symposium on Automatic Control, Hsinchu, Taiwan, R.O.C., pp.534-539, January 2000.
      1. 185.
      2. C.L. Lin and H.W. Su, “Applications of intelligent control concept in guidance and control system design,” Proceedings of the Eighth National Conference on Science and Technology of National Defense, Tahsi, Taoyuan, Taiwan, R.O.C., pp.52, January 1999.
      1. 186.
      2. C.L. Lin, C. C. Lai, T.H. Huang and T.Y. Lin, “Applications of neural networks in linear matrix inequalities solving,” Fourth Conference on Artificial Intelligence and Applications, Zhanhwa, Taiwan, R.O.C., pp.1-8, January 1999.
      1. 187.
      2. C.L. Lin, C. C. Lai, T.H. Huang and T.Y. Lin, “Recurrent neural networks for linear matrix inequality problems,” 1999 National Computer Symposium, Taipei, Taiwan, R.O.C., pp.A-387-393, January 1999.
      1. 188.
      2. C.L. Lin and H.T. Huang, “Control for uncertain plants using confined adaptive fuzzy inference systems,” The 16th National Conference on Mechanical Engineering Hsinchu, Taiwan, vol. 2, pp.5-12, January 1999.
      1. 189.
      2. C.L. Lin, V.T. Liu and P.S. Hao, “Robust neuro control for rotating disc vibrations,” The 11th National Conference on Automated Technology, Jiayii, Taiwan, R.O.C., pp.1473-1480, January 1999.
      1. 190.
      2. C.L. Lin, “Compensator design for missile radome refraction slope error,” 第六屆國科會航空學門研究成果暨航太科技發展研討會, Zhanhwa, Taiwan, R.O.C., CD-ROM, January 1999.
      1. 191.
      2. C.L. Lin and C.L. Chen, “Realization of real-time robust control law using recurrent neural networks,” Proceedings of National Symposium of Automatic Control, Taichung, Taiwan, R.O.C., pp.163-166, January 1999.
      1. 192.
      2. C.L. Lin, Y.H. Hsiao and T.S. Huang, “Adaptive feedforward control for disturbance torque rejection in seeker stabilizing loop,” Proceedings of National Symposium of Automatic Control, Taichung, Taiwan, R.O.C., pp.133-138, January 1999.
      1. 193.
      2. C.L. Lin, V.T. Liu and H.W. Su, “An approach to systematic design of fuzzy guidance law,” Sixth National Conference on Fuzzy Theory and Its Applications, Taichung, R.O.C., paper no. 009, January 1998.
      1. 194.
      2. V.T. Liu, C.L. Lin, L.C. Shiue and H.W. Su, “Design of fuzzy-PD based guidance law,” 1998 Conference on Industrial Automatic Control & Power Applications, Kaoshung, R.O.C., pp. A2-13-A2-18, January 1998.
      1. 195.
      2. C.L. Lin, W.R. Hsiao and C.L. Chen, “Neural net-based compensator design for radome refraction slope error,” Proceedings of the 1998 Aeronautics and Astronautics Conference, Taichung, Taiwan, R.O.C., pp.619-626, January 1998.
      1. 196.
      2. C.L. Lin and Y.Y. Chen, “Design of fuzzy guidance law against high speed Target,” Proceedings of the 1998 Aeronautics and Astronautics Conference, Taichung, Taiwan, R.O.C., pp.581-588, January 1998.
      1. 197.
      2. C.L. Lin, C.C. Lai and T.S. Huang, “Analog circuit realization of recurrent neural network for solving Lyapunov matrix equations,” Proceedings of The 9th VLSI/CAD Symposium, Nantou, Taiwan, R.O.C., pp.393-369, January 1998.
      1. 198.
      2. C.L. Lin, “On the study of optimal guidance design against high speed attacking target,” 第五屆國科會航空學門研究成果暨航太科技發展研討會, pp.II-123-126, January 1998.
      1. 199.
      2. C.L. Lin and Y.S. Chen, “Robust neuro control for perturbed systems,” Proceedings of National Symposium of Automatic Control, Yunlin, Taiwan, R.O.C., pp.245-249, January 1998.
      1. 200.
      2. C.L. Lin and Y.Y. Chen, “A study of optimal guidance law against high speed attacking target,” Proceedings of the 1997 Aeronautics and Astronautics Conference, Tainan, Taiwan, R.O.C., pp.116-123, January 1997.
      1. 201.
      2. C.L. Lin and Y.S. Chen, “Realization of real-time robust flexible structure controllers using recurrent neural networks,” The 14th National Conference on Mechanical Engineering, Chung-Li, Taiwan, R.O.C., pp.225-229, January 1997.
      1. 202.
      2. C.L. Lin and T.J. Chen, “A neural-network approach to investigate stability of uncertain singular systems,” 1997 National Computer Symposium, Taichung, pp.C26-31, January 1997.
      1. 203.
      2. C.L. Lin, “Neural net-based adaptive linear quadratic control,” Proceedings of the 1997 IEEE International Symposium on Intelligent Control, Istanbul, Turkey, July, pp.187-192, January 1997.
      1. 204.
      2. C.Y. Chung and C.L. Lin, “A general class of sliding surface for sliding mode control,” Proceedings of the 35th IEEE Conference on Decision and Control, Japan, January 1996.
      1. 205.
      2. C. L. Lin and V. T. Liu, “Estimation of stabilizing time-to-go on aerodynamically controlled missiles,” Proceedings of National Symposium of Automatic Control, Taipei, Taiwan, R.O.C., pp.452-457, January 1996.
      1. 206.
      2. V. T. Liu and C. L. Lin, “Optimal control of singularly perturbed systems with application to active suspension control,” Proceedings of National Symposium of Automatic Control, Taichung, Taiwan, R.O.C., January 1995.
      1. 207.
      2. C.L. Lin, “Analysis of nonlinear behavior for tactical missile systems using statistical linearization technique,” Proceedings of the Third National Conference on Science and Technology of National Defense, Tahsi, Taoyuan, Taiwan, R.O.C., January 1994.
      1. 208.
      2. V.T. Liu and C.L. Lin, “Observer-based robust control for discrete two-time-scale systems,” Proceedings of National Symposium of Automatic Control, Lungtan, Taoyuan, Taiwan, R.O.C., January 1994.
      1. 209.
      2. C.L. Lin and V.T. Liu, “Stabilization of flexible systems under a certain class of nonlinear feedback controls,” Proceedings of the Asia-Pacific Conference on Control and Measurement, Kunming, P.R. China, January 1993.
      1. 210.
      2. C.L. Lin, “Stability and miss distance analyses of radome refraction slope errors on aerodynamically controlled missiles,” Proceedings of the Second National Conference on Science and Technology of National Defense, Tahsi, Taoyuan, Taiwan, R.O.C., January 1993.
      1. 211.
      2. C.L. Lin, “Design of flexible structure control system using constrained controls,” Proceedings of the 1993 Aeronautics and Astronautics Conference, Chungli, Taiwan, R.O.C., January 1993.
      1. 212.
      2. C.L. Lin and V.T. Liu, “Stabilization of singularly perturbed large-scale interconnected discrete-time systems,” Proceedings of National Symposium of Automatic Control, Tainan, Taiwan R.O.C., January 1993.
      1. 213.
      2. C.L. Lin and L.Y. Jung, “Robust design criteria for active control of flexible structures,” Proceedings of the 1992 Aeronautics and Astronautics Conference, Tainan, Taiwan, R.O.C., January 1992.
      1. 214.
      2. C.L. Lin and V.T. Liu, “active control of flexible systems with structured perturbations,” Proceedings of the 31th IEEE Conference on Decision and Control, Tucson, Arizona, January 1992.
      1. 215.
      2. C.L. Lin and V.T. Liu, “Quantitative robustness analysis of discrete time singularly perturbed systems,” Proceedings of the 31th IEEE Conference on Decision and Control, Tucson, Arizona, January 1992.
      1. 216.
      2. C.L. Lin, “Robustness of feedback control for discrete two-time-scale systems,” CSIST Automatic Control Conference, Lungtan, Taiwan, R.O.C., January 1992.
      1. 217.
      2. C.L. Lin and V.T. Liu, “Application of generalized model matching control in missile autopilot design,” The 7th T.V.E. Conference of R.O.C., Taisan, Taiwan, R.O.C., January 1992.
      1. 218.
      2. C.L. Lin and L.Y. Jung, “Robust design criteria for flexible systems with structured perturbations,” Proceedings of National Symposium of Automatic Control, Chungli, Taiwan, R.O.C., January 1991.
      1. 219.
      2. C.L. Lin and V.T. Liu, “Robust design rule for observer-based control of discrete-time systems,” Proceedings of National Symposium of Automatic Control, Chungli, Taiwan, R.O.C., January 1991.
      1. 220.
      2. D. Chiu and C.L. Lin, “Missile specification design by using model expansion method and covariance analysis describing function technique,” Proceedings of National Symposium of Automatic Control, Taipei, Taiwan, R.O.C., January 1986.
    3. C.專書
      1. 1.
      2. T. Jennawasin and C. L. Lin, “A Convex Optimisation Approach to State Estimation of Noisy Genetic Networks,” in Advances in Biomedical Engineering and its Applications, pp.1-25, January 2015.
      1. 2.
      2. 林俊良, “3C科技與生活,” 3C科技與生活, July 2010.
      1. 3.
      2. C. L. Lin, C. H. Huang and C. W. Tsai, “Structure-Specified Real Coded Genetic Algorithms with Applications, in Advanced Knowledge Based Systems: Model, Applications & Research,” Structure-Specified Real Coded Genetic Algorithms with Applications, pp.160-187, January 2010.
      1. 4.
      2. 林俊良, “現代數理控制, 全球數位化授權版,” 現代數理控制, 全球數位化授權版, pp.共587頁, January 2010.
      1. 5.
      2. 林俊良、劉煥彩, “自動控制精義, 革新版,” 自動控制精義, 革新版, January 2008.
      1. 6.
      2. 林俊良, “現代數理控制,” 現代數理控制, pp.(共587頁), January 2007.
      1. 7.
      2. V. T. Liu, C. L. Lin, H. C. Huang, and Z. J. Jian, “ A Novel Micro-Positioning Controller for Piezoelectric Actuators,” in Lecture Notes in Control and Information Sciences,,” A Novel Micro-Positioning Controller for Piezoelectric Actuators, pp.440-455, January 2006.
      1. 8.
      2. 林俊良, “智慧型控制: 分析與設計,” 全華科技圖書公司, January 2004.
      1. 9.
      2. C. L. Lin, R. M Lai and S.W. Huang, “Adaptive Fuzzy Gain-Scheduled Missile Autopilot Design, in Nonlinear Systems in Aviation Aerospace, Aeronautics and Astronautics,” Sivasundaram (Ed), CRC Press, pp.57-71, January 2003.
      1. 10.
      2. 林俊良, “控制系統數學, 二版,” 全華科技圖書公司, January 2002.
      1. 11.
      2. 林俊良、劉煥彩, “三版, 自動控制精義,” 高立圖書公司, January 2002.
      1. 12.
      2. 林俊良, “強健控制系統:分析與設計 (Robust Control Systems: Analysis and Design),” 國立編譯館, January 1997.
      1. 13.
      2. 林俊良, “Robust Control of Large Flexible Structure Systems, Ph.D. Dissertation,” Institute of Aeronautics and Astronautics, National Cheng Kung University, January 1991.
    4. D.技術報告
      1. 1.
      2. 林俊良, “基因網路的狀態估測及控制,” 國科會研究成果報告, January 2010.
      1. 2.
      2. 林俊良, “基因網路的狀態估測及控制,” 國科會研究成果報告, January 2010.
      1. 3.
      2. 林俊良, 林育平, 黃俊瑋, “中高層飛彈導引律設計與分析(Ⅱ),” 中山科學研究院委託學術合作研究計畫, January 2009.
      1. 4.
      2. 林俊良, 林育平, 李雲皓, “中高層飛彈導引律設計與分析,” 中山科學研究院委託學術合作研究計畫, January 2008.
      1. 5.
      2. 林俊良, “融合式定位演算法技術評估,” 工研院委託研究成果報告, January 2007.
      1. 6.
      2. 林俊良, “太陽能冷凍空調系統之最佳節能設計,” 國科會研究成果報告, January 2007.
      1. 7.
      2. 林俊良, “以背景知識為基礎的智慧型無人飛行載具導航設計,” 國科會研究成果報告, January 2007.
      1. 8.
      2. 林俊良, “電動機車性能及效能改進,” 國科會研究成果報告, January 2006.
      1. 9.
      2. 林俊良, “一種以分子活動為基礎的系統鑑別法,” 國科會研究成果報告, January 2006.
      1. 10.
      2. 林俊良, “整合型多工數位驅動器控制器設計,” 中科院分包學界成果報告, January 2005.
      1. 11.
      2. 林俊良, “Development of an Integrated Fuzzy-Logic-Based Missile Guidance Law against High Speed Target (3/3),” 國科會研究成果報告, January 2004.
      1. 12.
      2. 林俊良, “前瞻性數位化伺服電路控制迴路分析設計,” 中科院分包學界成果報告, January 2004.
      1. 13.
      2. 黃榮興、林俊良, “TTP/C測試功能評估計畫,” 工研院航研究成果報告, January 2003.
      1. 14.
      2. 林俊良, “反飛彈導引律設計與鼻錐罩斜率誤差之估測,” 國推會研究成果報告, January 2003.
      1. 15.
      2. 林俊良, “反飛彈導引律設計與鼻錐罩斜率誤差之估測,” 國推會研究成果報告, January 2003.
      1. 16.
      2. 黃榮興、林俊良, “TTP/C測試弁鉞繾p畫,” 工研院航研究成果報告, January 2003.
      1. 17.
      2. 劉永生、林俊良, “輕軌車結構疲勞分析與振動抑制,” 中科院軍民通用科技轉委託合作計畫研究成果報告, January 2003.
      1. 18.
      2. 林俊良, “Development of an Integrated Fuzzy-Logic-Based Missile Guidance Law against High Speed Target (2/3),” 國科會研究成果報告, January 2003.
      1. 19.
      2. 黃榮興、林俊良, “空用機載容錯電腦之研製,” 工研院航研究成果報告, January 2002.
      1. 20.
      2. 林俊良, “Development of an Integrated Fuzzy-Logic-Based Missile Guidance Law against High Speed Target (1/3),” 國科會研究成果報告, January 2002.
      1. 21.
      2. 林俊良, “線性馬達為基礎之高速動態平台控設計及模擬,” 科會大專生專題計畫研究成果報告, January 2002.
      1. 22.
      2. 林俊良, “彈訓機即時位置量測與控制研製,” 中科院研究成果報告, January 2001.
      1. 23.
      2. 林俊良, “Robust neuro control based on linear matrix inequalities,” 國科會研究成果報告, January 2001.
      1. 24.
      2. 林俊良, “Application of gain scheduling and fuzzy control in missile guidance and control system design (3/3),” 國科會研究成果報告, January 2001.
      1. 25.
      2. 林俊良, “一種具有新式模糊推論輔助之車輛防鎖死煞車系統:分析及設計,” 國科會大專生專題計畫研究成果報告, January 2000.
      1. 26.
      2. 林俊良, “線性馬達驅動平台之控制研究,” 中科院研究成果報告, January 2000.
      1. 27.
      2. 林俊良, “Application of gain scheduling and fuzzy control in missile guidance and control system design (2/3),” 國科會研究成果報告, January 2000.
      1. 28.
      2. 林俊良, “Study and improvement for high-precision servo control theory,” 國科會研究成果報告, January 2000.
      1. 29.
      2. 林俊良, “導控迴路即時模擬架構之建立,” 國科會大專生專題計畫研究成果報告, January 2000.
      1. 30.
      2. 林俊良, “Application of gain scheduling and fuzzy control in missile guidance and control system design (1/3),” 國科會研究成果報告, January 1999.
      1. 31.
      2. 林俊良, “Realization of real-time Riccati equation-based controller using recurrent neural network,” 國科會研究成果報告, January 1999.
      1. 32.
      2. 林俊良, “Adaptive compensator design for missile radome refraction slope error,” 國科會研究成果報告, January 1998.
      1. 33.
      2. 林俊良, “A study of optimal guidance law against high speed attacking target,” 國科會研究成果報告, January 1997.
      1. 34.
      2. 林俊良, “天弓二型飛彈系統參數文件,” 中山科學研究院,, January 1993.
      1. 35.
      2. 林俊良, “應用共變異描述函數法於天弓二型飛彈規格之擬定,” 中山科學研究院, January 1992.
      1. 36.
      2. 林俊良, “Analysis and Design of a Mixed Linear and Rotary Motors-Based Dynamic Platform,” 國科會研究成果報告, .
    5. E.專利
      1. 1.
      2. 吳孟宗、林俊良, “單極式交直流一體無刷發電機,” 096125671, January 207.
      1. 2.
      2. 林俊良、黃啟東, “電動機車之可產生類似防鎖死剎車作用的煞車控制器,” 中華民國發明專利 (專利號碼: I384733), January 2013.
      1. 3.
      2. 林俊良、許舜斌、吳鎮亞, “串並聯電池之平衡電量之方法,” 中華民國發明專利 (專利號碼: I403073), January 2013.
      1. 4.
      2. 林俊良、陳泱億、江正塘, “具有心電圖輔助之指紋辨識器,” 中華民國新型專利, (專利號碼: M 453912), January 2013.
      1. 5.
      2. 林俊良、陳鏡崑、江正塘, “以指紋與心電訊號為基礎之個人資料加/解密系統,,” 中華民國發明專利, (申請號碼: 102121398), January 2013.
      1. 6.
      2. 林俊良、林靖傑、江正塘, “具心電圖補助與血氧脈搏量測之心血管硬化辨識系統,” 中華民國新型專利, (申請號碼: 102219973), January 2013.
      1. 7.
      2. 林俊良、吳孟宗、葉英杰, “停車場車輛電力回充集合式住宅公共用電系統之裝置,” 中華民國發明專利, (申請號碼: 102128883), January 2013.
      1. 8.
      2. 林俊良、吳孟宗、葉英杰, “用於固定建築物與可移動車輛間之可雙向無線感應充電系統,” (申請中), January 2013.
      1. 9.
      2. 林俊良、林翁慶, “可調節ABS電子剎車制動力之系統,” 中華民國發明專利 (申請號碼: 101131596), January 2012.
      1. 10.
      2. 林俊良、彭釉喆, “組合電池之靜態電量平衡法,” 中華民國發明專利, (申請號碼: 101131420), January 2012.
      1. 11.
      2. 林俊良、林翁慶, “可產生類似防鎖死剎車作用的雙輪驅動電動機車之剎車控制系統,” 中華民國發明專利 (專利號碼: I370078), January 2012.
      1. 12.
      2. 林俊良、黃啟東、黃金龍, “電動腳踏車電能回充與踩踏力輔助控制器,” 中華民國發明專利 (專利號碼: I371899), January 2012.
      1. 13.
      2. 林俊良、黃啟東, “電動車輛電能回充控制器,” I352671, November 2011.
      1. 14.
      2. 林俊良、郭至偉、陳其宇, “具操作者體能監測功能之衛星定位導航儀,” I346770, August 2011.
      1. 15.
      2. 邱尚明、林俊良、黃明仕, “腦立體定位手術頭架固定輔助器,” 中華民國新型專利 (專利號碼: M414936), January 2011.
      1. 16.
      2. 林俊良、許舜斌、吳鎮亞, “可彈性規劃組合式電池充電電流之方法及其裝置,” 中華民國發明專利 (公告號碼: 100128290), January 2011.
      1. 17.
      2. 林俊良、柯博仁, “高速公路車輛最佳巡航速度決策系統,” I339819, January 2011.
      1. 18.
      2. 林俊良、郭至偉、陳其宇, “具操作者體能監測功能之衛星定位導航裝置,” 中華民國發明專利 (專利號碼: I346770), January 2011.
      1. 19.
      2. 林俊良、許其峰, “自行車導航規劃法,” 中華民國發明專利 (申請號碼: 099135887)領證中, January 2010.
      1. 20.
      2. 林俊良、徐秉民, “最佳多工除草作業之運算方法,” I310677, January 2009.
      1. 21.
      2. 林俊良、林昭宏, “工具機平台熱變形量測補償裝置,” 中華民國發明專利,申請中, January 2009.
      1. 22.
      2. 林俊良、林昱成, “集電弓之主動式抑振控制器,” I 298296, January 2008.
      1. 23.
      2. 林俊良、徐秉民、陳鏡崑, “自主式除草機的最佳路徑之運算方法,” I300330, January 2008.
      1. 24.
      2. 林俊良、陳啟杉、劉煥彩, “電動機車電能控制器,” I 291796, January 2007.
      1. 25.
      2. 林俊良、陳嘉男、劉煥彩, “智慧型燃料電池/電動混合機車電能控制系統,” I 273996, January 2007.
      1. 26.
      2. 林俊良、黃榮興、劉俊德、張博光、康文傑, “具有適應控制及失效偵測之飛控系統,” I 242700, January 2005.
      1. 27.
      2. 吳孟宗、林俊良、胡奉麟, “一種飛行載具防鎖死煞車控制系統,” (專利號碼: 171235號), January 2003.
      1. 28.
      2. 林俊良、陳彥亨、林裕堅, “具有模糊邏輯推論器之防鎖死煞車控制系統,” 專利號碼: 446657號, January 2001.
      1. 29.
      2. 林俊良、黃榮興、劉俊德、張博光、康文傑, “具有適應控制及失效偵測之飛控系統,” 中華民國、美國發明專利, 2003, 審查中, .
      1. 30.
      2. 林俊良、鍾隆斌, “可建構彩色立體影像的影像擷取裝置,” 中華民國新型專利 (申請號碼: 102220210), .
    6. F.專書章節
      1. 1.
      2. 謝念中、張欽宗、林俊良、林昱成, “具拘束限制之多目標進化法則於輔助輕軌車懸吊系統之最佳化設計,” 機械技術雜誌, pp.119-131, January 2004.
      1. 2.
      2. 詹弘雍、林俊良, “認識生物演算法-DNA演算法則,” 自動控制, pp. 37-45, January 2003.
      1. 3.
      2. 劉通敏、林俊良, “逢甲大學產學合作規劃與展望,” 九十年國科會工程處航太學門產學研討會, pp.31-36, January 2001.
      1. 4.
      2. 林俊良、吳彥廷、洪旭寶, “導控迴路即時模擬架構之建立,” 機電整合雜誌, pp.76-84, January 2000.
      1. 5.
      2. 林俊良, “認識基因演算法則與控制,” 自動控制,, pp.1-27, January 2000.
      1. 6.
      2. 林俊良, “認識類神經網路與控制,” 自動控制, pp.88-103, January 1999.
      1. 7.
      2. 林俊良, “認識模糊邏輯與控制,” 自動控制, pp. 47-61, January 1998.
      1. 8.
      2. 林俊良, “由中共導彈威脅談導控系統因應之道,” 自動控制, pp.70-78, January 1996.
      1. 9.
      2. 林俊良, “俟機而動的電腦病毒武器,” 國防譯粹月刊, pp.94-100, January 1995.
      1. 10.
      2. 梁厚芳、林俊良, “增程攔截飛彈(ERINT)系統剖析,” 新新雙月刊, pp.105-119, January 1995.
      1. 11.
      2. 梁厚芳、林俊良, “高層彈道飛彈防禦的主力-THAAD計畫,” 新新雙月刊, pp.182-191, January 1995.
      1. 12.
      2. 林俊良, “數位化:優勢陸權之鑰,” 國防譯粹月刊, pp.4-12, January 1995.
      1. 13.
      2. 林俊良, “俄羅斯資訊時代的戰爭觀,” 國防譯粹月刊, pp.43-51, January 1995.
      1. 14.
      2. 林俊良, “美國陸軍自動化之道,” 國防譯粹月刊, pp.95-100, January 1994.
      1. 15.
      2. 林俊良, “蓬勃發展中的反戰術性彈道飛彈,” 新新雙月刊, pp.149-153, January 1994.
      1. 16.
      2. 林俊良, “先進之美國海軍指管系統,” 國防譯粹月刊, pp.88-93, January 1994.
      1. 17.
      2. 林俊良, “動態系統數值模擬之誤差與修正,” 新新雙月刊, pp.132-142, January 1994.
      1. 18.
      2. C. L. Lin and V. T. Liu, “Stabilization of flexible systems under a certain class of nonlinear feedback control,” 雲林工專學報, pp.155-192, January 1993.
      1. 19.
      2. V.T. Liu and C.L. Lin, “Robustness of vibratory control systems using mode residualization or mode truncation,” 雲林工專學報, pp.193-228, January 1993.
      1. 20.
      2. 林俊良, “中共凱山一號飛彈系統簡介,” 新新雙月刊, pp.82-88, January 1993.
 
返回